1 November 2019 in Energy Policy
1 September 2017 in Building and Environment
1 August 2016 in Building and Environment
As the 2003 Paris heatwave showed, elevated temperatures in buildings can cause thousands of deaths. This makes the assessment of overheating risk a critical exercise. Unfortunately current methods of creating example weather time series for the assessment of overheating are based on a single weather variable, and hence on only one driver of discomfort or mortality. In this study, two alternative approaches for the development of current and future weather files are presented: one (pHSY-1) is based on Weighted Cooling Degree Hours (WCDH), the other (pHSY-2) is based on Physiologically Equivalent Temperature (PET). pHSY-1 and pHSY-2 files were produced for fourteen locations. These were then compared with the existing probabilistic future Design Summer Year (pDSY) and the probabilistic future Test Reference Year. It was found that both pHSY-1 and pHSY-2 are more robust than the pDSY. It is suggested that pHSY-1 could be used for assessing the severity and occurrence of overheating, while pHSY-2 could be used for evaluating thermal discomfort or heat stress. The results also highlight an important limitation in using different metrics to compare overheating years. If the weather year is created by a ranking of a single environmental variable, to ensure consistent results assessment of the building should be with a similar single metric (e.g. hours >28°C or WCDH), if however the weather year is based upon several environmental variables then a composite metric (e.g. PET or Fanger’s PMV) should be used. This has important implications for the suitability of weather files for thermal comfort analysis
1 October 2017 in Building and Environment
1 November 2015 in Energy Procedia
Building practitioners assess the overheating risk of buildings via dynamic thermal comfort simulation with hotter than average reference weather years. In the UK, the near-extreme hot summer years called Design Summer Years (DSY) offered by the Chartered Institute of Building Services Engineers (CIBSE) are provided for fourteen locations for the purpose of estimating overheating risk of naturally ventilated buildings. The current DSY is selected based on the third warmest mean summer dry bulb temperature (DryT) during April to September. However, it has been proved that the simple method used for creating DSY leads to obvious problems into the thermal comfort simulations. In this research, a new design summer year termed as a Hot Summer Year (HSY) is created based on weather data generated from the UK Climate Projections weather generator and the Physiological Equivalent Temperature (PET). The effects of using the DSY and the HSY on indoor thermal comfort are analyzed based on a static overheating risk criterion recommended by CIBSE. With the aim of predicting future overheating risk, future HSYs are created for 2050s and 2080s under the high emission scenario for fourteen locations. These are created to investigate overheating risk of dwellings across the UK
15 November 2022 in Building and Environment