In the present study, we have used a simple and cost-effective removal technique by a commercially available Fe-Al-SiO2 containing complex material (hardened paste of Portland cement (HPPC)). The adsorbing performance of HPPC and modified HPPC with perlite for removal of cefixime from aqueous solutions was investigated comparatively by using batch adsorption studies. HPPC has been selected because of the main advantages such as high efficiency, simple separation of sludge, low-cost and abundant availability. A Taguchi orthogonal array experimental design with an OA16 (45) matrix was employed to optimize the affecting factors of adsorbate concentration, adsorbent dosage, type of adsorbent, contact time and pH. On the basis of equilibrium adsorption data, Langmuir, Freundlich and Temkin adsorption isotherm models were also confirmed. The results showed that HPPC and modified HPPC were both efficient adsorbents for cefixime removal.
1 March 2019 in Journal of Advances in Medical and Biomedical Research
Background & Objective: Molybdenum trioxide nanoparticles (MoO3 NPs) have widespread applications in industries. However, the toxic and non-toxic effects of MoO3 NPs have not been fully investigated yet. In this study, effects of MoO3 NPs on ovary function of female rats were studied. Materials & Methods: In this study, 21 ...
The present study investigates the photocatalytic degradation of C. I. acid red 14 (AR 14) as a textile dye, in aqueous medium using immobilized TiO2 nanopowder on glass beads illuminated by a UV-C lamp (30 W). Photocatalytic degradation of organic pollutants is done with photogenerated holes as a result of UV light irradiation on surface of TiO2 nanoparticles and generation of hydroxyl radicals as power oxidant. This process is performed under a set of variables (concentration of peroxydisulfate, AR 14, and temperature). AR 14 photocatalytic degradation increased with increasing peroxydisulfate concentration and temperature. The increase in dye concentration caused a decrease in removal efficiency. The progress of photocatalytic decolorization of the AR 14 was studied by measuring the absorbance at λmax = 514 nm by UV–Vis spectrophotometer. The results indicated no observable loss of the color when the UV or UV/TiO2 was applied in the absence of . The results reveal that a considerable decrease in the concentration of the dye occurs when the sample was photocatalytic degraded by .