Nanocomposites made from biodegradable polymers reinforced with nanocellulose have become quite attractive for sustainable electromechanical applications. In this work, nanocellulose extracted from roselle (RCNC) has been added to polyvinyl alcohol (PVA) through solution casting to prepare flexible nanocomposite films that offer tuneable structure-property-performance attributes. The effect of RCNC loading (0–7 wt%) on the structure, mechanical, thermal, morphological, and physical properties of PVA/RCNC nanocomposites was explored. XRD and FTIR analysis suggested that RCNC acts as a nucleating and reinforcing agent that promotes structural organization and enhances the intermolecular hydrogen bonding in PVA while maintaining the same chemical structure. FESEM analysis showed uniform distribution and formation of a well-connected fibrillar network at low to moderate levels of RCNC, while aggregation occurs at high levels. Significant improvement in mechanical properties was achieved, resulting in up to a 260 % increase in tensile strength and 360 % increase in modulus when the amount of RCNC was optimized to 5 wt%. This is due to limited mobility of polymer chains caused by aggregation and restricted movement. The thermal stability of nanocomposites improved for low to moderate amounts of RCNC, while water absorption and moisture content increased with RCNC content. These results show that structural organization, interface interaction, and dispersion of nanoparticles play important roles in achieving good performance of nanocomposites. Optimal 5 wt% level of RCNC is obtained for mechanical reinforcement, thermal stability, and controllable hygroscopicity. Therefore, such nanocomposites have promising potential for the preparation of biodegradable piezoelectric sensing and energy harvesting devices.