21 April 2022 in International Journal of Non-Linear Mechanics
20 July 2023 in Journal of Sound and Vibration
7 January 2025 in Energy Conversion and Management
14 September 2020 in IEEE Access
To realize the self-power of the vehicle micro-sensors, a piezo-electromagnetic hybrid vehicle-mounted energy harvester is proposed to recover the wind and vibration energy generated during driving. This energy harvester includes a flutter piezoelectric energy harvesting structure (FPEH) and an electromagnetic vibration energy harvester structure (EVEH). The combination of the two structures can improve the energy harvesting effect and reduce the cut-in wind speed. The coupled vibration mathematical model is established to predict the output performance of the wind energy harvesting effect. The effects of the different distances between magnets on the output are discussed. And the vibration characteristics of piezoelectric and electromagnetic vibrators are analyzed. Results show that the energy-harvesting effect is the best when the distance between magnets is 30mm. At the same time, the numerical simulation proves that the wind energy harvesting effect of the hybrid structure is better than the classic flutter structure. The experimental verification is carried out, and the experimental results are consistent with the theoretical prediction results, which verified the correctness of the theory. The optimal load of FPEH is 70kΩ , and the optimal load of EVEH is 60Ω. Under these conditions, when the wind speed is 18m/s, the peak output power of FPEH is 14.5mW, and that of EVEH is 31.8mW.
3 July 2024 in Mechanical Systems and Signal Processing
20 April 2021 in Smart Materials and Structures
In order to study the influence of vehicle body vibration caused by road excitation on the output performance of a vehicle piezoelectric electromagnetic hybrid energy harvester, the theoretical analysis of the energy harvester is carried out, and a corresponding electromechanical coupling model is established. The hybrid energy harvester includes a flutter piezoelectric energy harvester (FPEH) and an electromagnetic vibration energy harvester (EVEH). Sweep frequency experiments and wind tunnel experiments were carried out to verify the correctness of the coupling model. By establishing the road-vehicle coupling differential equations solving module, the vehicle body vibration under different road surfaces was simulated, and the influence of different roads on output performance is analyzed. The results show that when vehicle body vibration is not considered, the cut-in speed of the harvester is 32 km h−1. When the vehicle speed is higher than 32 km h−1, vehicle body vibration caused by road roughness will suppress the overall output performance. When the vehicle speed is less than 32 km h−1, the vibration of the vehicle body will cause the energy harvester to have no obvious cut-in wind speed. And the higher the road level, the stronger the body vibration, and the better the output performance when the vehicle speed is less than 32 km h−1. Under E-class road with vehicle body vibration considered, it has already power output at a vehicle speed of 20 km h−1. When the vehicle speed reaches 57 km h−1, the output power of hybrid FPEH and EVEH reach 1.74 and 2.51 mW under E-class road (2.88 and 3.25 mW under A-class road), respectively.