1 October 2020 in Science of The Total Environment
1 October 2020 in Water Research
1 August 2022 in Water Science & Technology
The development of commercial software and simulators has progressed to assist engineers to optimize design, operation, and control of wastewater treatment processes. Commonly, manual trial-and-error approaches combined with engineering experience or exhaustive searches are used to find candidate solutions. These approaches are becoming less favorable because of the increasingly elaborate process models, especially for new and innovative processes whose process knowledge is not fully established. This study coupled genetic algorithms (GAs), a subfield of artificial intelligence (AI), with a commercial simulator (SUMO) to automatically complete a design task. The design objective was the upgrade of a conventional Modified Ludzack-Ettinger (MLE) process to a hybrid membrane aerated biofilm reactor (hybrid MABR). Results demonstrated that GAs can (1) accurately estimate five influent wastewater fractions using eleven typical measurements – 3 out of 5 estimated fractions were nearly the same and the other two were within 7% relative errors and (2) propose reasonable designs for the hybrid MABR process that reduce footprint by 17%, aeration by 57%, and pumping by 57% with significantly improved effluent nitrogen quality (TN<3 mg-N/L). This study demonstrated that tools from AI promote efficiency in wastewater treatment process design, optimization and control by searching candidate solutions both smartly and automatically in replacement of manual trial-and-error methods. The methodology in this study contributes to accumulating process knowledge, understanding trade-offs between decisions, and finally accelerates the learning pace for new processes.
10 October 2022 in Water Science & Technology
Membrane aerated biofilm reactors (MABRs) are a promising biological wastewater treatment technology, whose industrial applications have dramatically accelerated in the last five years. Increased popularity and fast industrial adaptation are coupled with increased needs to monitor, optimize, and control MABRs with available online sensors. Observations of commercial scale MABR installations have shown a distinctive and repetitive pattern relating oxygen purity in MABR exhaust gas to reactor ammonia concentrations. This provides an obvious opportunity for process monitoring and control which this paper investigates with the help of modeling. The relationship plots between the bulk ammonia concentration and the oxygen purity are defined as MABR fingerprint plots, which are described in the form of steady-state curves and dynamic trajectories. This study systematically investigated, analyzed, and explained the behaviors and connections of steady-state curves and dynamic trajectories with a MABR model in SUMO®, and proposed a hypothesis about utilizing the MABR fingerprint plots to characterize MABR system performance, identify the limiting factor of biofilms, and possibly develop a soft senor for MABR biofilm thickness monitoring and control.
1 October 2013 in Fusion Engineering and Design
20 September 2021 in Water Science & Technology
Grey-box models, which combine the explanatory power of first-principle models with the ability to detect subtle patterns from data, are gaining increasing attention in wastewater sectors. Intuitive, simple structured but fit-for-purpose grey-box models that capture time-varying dynamics by adaptively estimating parameters are desired for process optimization and control. As an example, this study presents the identification of such a grey-box model structure and its further use by an extended Kalman filter (EKF), for the estimation of the nitrification capacity and ammonia concentrations of a typical Modified Ludzack-Ettinger (MLE) process. The EKF was implemented and evaluated in real time by interfacing Python with SUMO (Dynamita™), a widely used commercial process simulator. The EKF was able to accurately estimate the ammonia concentrations in multiple tanks when given only the concentration in one of them. In addition, the nitrification capacity of the system could be tracked in real time by the EKF, which provides intuitive information for facility managers and operators to monitor and operate the system. Finally, the realization of EKF is critical to the development of future advance control, for instance, model predictive control.