In anaerobic digestion (AD), the choice of inoculum type seems to be relevant for methane production for complex substrates, such as lignocellulosic material. Previous work demonstrated that the addition of fresh manure and ruminal fluid to anaerobic sludge improved methane productivity and kinetics of AD of crude sugarcane bagasse (CSB). Considering that the improvement of methane production could be a result of a more adapted microbial community, the present study performed Next Generation Sequencing analysis to identify changes in the microbiome of anaerobic sludge inoculum, resulting from fresh manure and ruminal fluids addition. In comparison with AD performed only with anaerobic sludge inoculum (50:50, U), accumulated methane production was 15% higher with anaerobic sludge plus ruminal fluid inoculum (50:50, UR) and even higher (68%) with anaerobic sludge with fresh bovine manure inoculum (50:50, UFM), reaching the value of 143 NmLCH4.gVS-1. On the other hand, Clostridium species were highly abundant in all inocula, playing an important role during hydrolysis and fermentation of CSB, as well as to detoxify potential inhibitors. Microbial composition revealed the occurrence of Pseudomonas and Anaerobaculum at UFM inoculum that seem to have contributed to the higher methane production rate, mainly due to their hydrolytic and fermentative ability on lignocellulosic substrates. On the other hand, the presence of Alcaligenes might have had a negative effect on methane production due its ability to perform methane oxidation. GRAPHICAL ABSTRACT
Neste estudo foi avaliada a remoção de sulfametoxazol, diclofenaco e 17β-estradiol em água natural por meio da oxidação com cloro. As concentrações iniciais dos microcontaminantes, bem como o tempo após a aplicação do cloro, apresentaram diferenças significativas na remoção dos compostos de interesse. As águas naturais foram submetidas ao tratamento por clarificação seguido da pós-cloração, e os resultados revelaram que a melhor eficiência de remoção, com dosagem de cloro de 2,0 mg.L-1 foi da ordem de 58%, 54% e 67% para diclofenaco, 17β-estradiol e sulfametoxazol, respectivamente. O aumento da dose de cloro (3,0 mg.L-1), para tempo de contato de 60 min, não resultou em maior remoção dos microcontaminantes (69% para diclofenaco, 49% para 17β-estradiol e 9,4% para sulfametoxazol). A formação de subprodutos foi observada para os microcontaminantes sulfametoxazol e 17β-estradiol, e não evidenciada para o diclofenaco, o qual apresentou um dos maiores valores de remoção por meio da oxidação com o cloro. Palavras-chave: Fármacos. Cloração. Subprodutos de desinfecção. Tratamento de água.