We present an analytical one-dimensional model of the laser generation of ultrasound that takes the optical penetration effect into account. This model leads to a simple expression relating the full width at half maximum of the precursor to the product of the optical absorption coefficient by the longitudinal velocity, and establishes the conditions under which this expression is valid. The results of this model are compared to those provided by a more sophisticated semianalytical three-dimensional model and to experimental data obtained under various experimental conditions. The agreement is very good.
In this article, we concentrate on the optical penetration and laser pulse duration effects on the features of the ultrasonic waves generated in a solid by a laser impact. We consider the simple case of a uniform irradiation of the sample, which we describe with the help of a simple analytical one-dimensional model. In spite of its simplicity, this model clearly highlights the competition that occurs between two temporal convolution sources, related to the optical penetration and the laser pulse duration, respectively, to produce the longitudinal arrivals on the rear side of the sample. The model is also used for an accurate description of the features of the longitudinal precursor.
19 May 2020 in Journal of Geophysical Research: Solid Earth
Airborne magnetic surveys are common in geosciences. High‐precision surveys are usually performed at a low altitude, draping the topography, using scalar absolute magnetometers and active compensation systems to correct the disturbances generated by the carrier. Another solution is to measure the total magnetic intensity using vector magnetometers, which allows compensation for aircraft fields to be calculated directly, without compensation systems. This study uses data of an industrial airborne survey and of a vector magnetometer survey with a small overlapping area in the Vosges (France) to compare both data sets and shows that both solutions provide results of the same overall precision. This paper also addresses the issue of combining fixed altitude and draped level data sets as well as topographic effect management by proposing an equivalent source interpolator based on a set of simple dipole sources. A synthetic case shows that the equivalent source interpolator allows to compute grids of the magnetic anomaly as well as potential field transforms from a draped data set with an error level a few orders of magnitude lower than could be obtained with minimum curvature, a classically applied interpolator. The interpolator is also tested on a case study in the Vosges massif of which geological interpretation is presented in Bertrand et al. (2020, https://doi.org/10.1029/2019JB017688). The results confirm the observations made on the synthetic case and show that the equivalent source interpolator is more tolerant to navigation errors (altitude) than minimum curvature and allows more rigorous computation of potential field transforms of draped data sets.