1 January 2018 in Cold Regions Science and Technology
1 February 2019 in Journal of Performance of Constructed Facilities
The reasonable damage evaluation method for tunnel structure can be used to determine the overall safety state of the tunnel structure and can help to establish the maintenance plan of the tunnel structure. As a fuzzy system, the evaluation process of tunnel damage has the characteristics of randomness and fuzziness. Traditional tunnel damage evaluation methodologies do not account for the fuzziness and randomness of the system. Therefore, this study puts forward a visual evaluation method based on cloud theory for evaluating tunnel damage. Damage evaluation for a shield tunnel section of Changsha Metro Line Two in China has been taken as a case study. This method effectively considers the fuzziness and randomness of the evaluation system, improves robustness of the results of the structural damage evaluation, and is a simple and visual method.
9 April 2019 in Geomechanics and Geoengineering
In this study, uniaxial compression experiments with seven different bedding angles and six numbers of freeze–thaw cycles were conducted to investigate the influences of freeze–thaw cycles on the elastic parameters and the uniaxial compressive strength of slate. The laws of the elastic parameters, uniaxial compressive strength and failure characteristics were analysed, and a new uniaxial compressive strength prediction model that considers the bedding angle and the number of freeze–thaw cycles as control variables was established and verified using the experimental data. The results showed that the uniaxial compressive strength, elastic modulus and shear modulus decreased exponentially with an increasing number of freeze–thaw cycles. However, the Poisson’s ratio increased linearly with an increasing number of freeze–thaw cycles. The uniaxial compressive strength initially decreased and then increased with increasing bedding angle. There are three forms of failure occurred during the tests: when the bedding angle was 0°≤β ≤ 26.6°, the splitting failure and shear failure occurred at the same time; when the bedding angle was 26.6°≤β ≤ 83.0°, sliding failure occurred along the bedding plane; and when the bedding angle was 83.0°≤β ≤ 90°, splitting failure occurred along the axial direction of sample.