10 November 2024 in ChemSusChem
The utilization of carbon dioxide through chemical conversion is a promising approach for the recycling of carbon resources. Despite well‐developed industrial processes for CO 2 hydrogenation to methanol, the effective use of CO 2 as a feedstock remains challenging because of the costly requirements of high temperature and reaction pressure. In this paper, we report the methanol synthesis from CO 2 and hydrogen using a dielectric barrier discharge (DBD) reactor under atmospheric pressure with a nickel‐cerium‐aluminum mixed oxide (Ni/Ce−Al MOx) catalyst. The combined use of plasma and the Ni/Ce−Al MOx catalyst was observed to yield 13.3±0.4 % of methanol, favorably compared to the 2.6±0.5 % yield of the case without catalyst. Microscopy images, selected area electron diffraction patterns, and energy‐dispersive X‐ray analysis confirmed the presence of fluorite‐structured ceria, aluminium, nickel, and nickel oxide particles in the catalyst. The reaction mechanism for the plasma‐assisted hydrogenation of CO 2 was hypothesized to involve a carbide formation pathway due to the presence of carbide confirmed by X‐ray photoelectron spectroscopic characterization.
10 December 2024 in Nanoscale
Plasma-assisted treatment with a falling-film plasma reactor can destroy polystyrene nanoplastics in aqueous solutions, yielding solutions with low particle counts, short-chain polystyrene oligomers, and decreased total carbon content.
16 December 2024 in Journal of Physics D: Applied Physics
Plasma-assisted degradation (PAD) methods have shown promise in water treatment applications, leveraging electrical energy to break down organic contaminants. Here we report our investigation of the driving frequency dependent nature of PAD using a falling-film plasma reactor for the degradation of brilliant blue dye in aqueous solutions. The degradation kinetics of the dye were analyzed and correlated with the energy efficiency, power consumption, and driving frequency of the reactor. Experimental trials revealed that tuning the driving frequency to align with the reactor’s natural resonance significantly enhanced degradation efficiency, achieving an electrical energy per order (E EO) of nearly 100 kW m−3 at an optimal frequency of 9 kHz. Results indicate a nonlinear relationship between power consumption and frequency, confirming harmonic resonance within the plasma reactor and underscoring the importance of optimizing electrical parameters for cost-effective treatment. An LCR circuit model was used to explain the differences in power consumption across the examined frequency range. This research highlights the potential of driving frequency tuning to optimize the generation of reactive chemical species in PAD methods for organic contaminant degradation. By highlighting how harmonic frequency tuning maximizes reactive species generation, this study provides a foundation for future improvements in PAD systems, offering a pathway to scalable, energy-efficient water treatment technologies.