10 November 2024 in ChemSusChem
The utilization of carbon dioxide through chemical conversion is a promising approach for the recycling of carbon resources. Despite well‐developed industrial processes for CO 2 hydrogenation to methanol, the effective use of CO 2 as a feedstock remains challenging because of the costly requirements of high temperature and reaction pressure. In this paper, we report the methanol synthesis from CO 2 and hydrogen using a dielectric barrier discharge (DBD) reactor under atmospheric pressure with a nickel‐cerium‐aluminum mixed oxide (Ni/Ce−Al MOx) catalyst. The combined use of plasma and the Ni/Ce−Al MOx catalyst was observed to yield 13.3±0.4 % of methanol, favorably compared to the 2.6±0.5 % yield of the case without catalyst. Microscopy images, selected area electron diffraction patterns, and energy‐dispersive X‐ray analysis confirmed the presence of fluorite‐structured ceria, aluminium, nickel, and nickel oxide particles in the catalyst. The reaction mechanism for the plasma‐assisted hydrogenation of CO 2 was hypothesized to involve a carbide formation pathway due to the presence of carbide confirmed by X‐ray photoelectron spectroscopic characterization.
3 January 2023 in Journal of Applied Polymer Science
23 February 2023 in New Journal of Chemistry
In this study, we report an eco-friendly biocomposite fabrication process for valorizing coconut fibers (coco coir) by transforming them into multi-purpose biocomposites using a pectin-based one-pot aqueous process. In our green approach, we used high methoxyl pectin (degree of methoxylation: 74%) as a crosslinker for binding lignin present in coco coir under basic conditions via the transesterification reaction. The fabrication process was performed at a moderate reaction temperature (70 °C) with water as the only solvent. We conducted statistical analysis to determine the impact of different mass ratios of pectin to coco coir (1 : 5, 2 : 5, 3 : 5, 4 : 5, and 5 : 5) on the mechanical compressive strength and bulk density of the as-fabricated coco coir composite materials. As this mass ratio increased from 1 : 5 to 5 : 5, the compressive strength of the coco coir composites increased by 3 times and the bulk density increased by ca. 1.3 times. The measurements of electrical conductivity, water retention capacity, carbon-to-nitrogen ratio (C/N), and substrate acidity (pH) of these coco coir biocomposites revealed the applicability of these biocomposites as suitable growth substrates for hydroponic cultivation. These biocomposite substrates were applied to grow Daikon radish in a hydroponic system for a 30-day study to demonstrate their potential for hydroponic cultivation.
29 May 2020 in RSC Advances
Recent increasing uses of ceria in research and industrial applications have fostered continuing developments of efficient routes to synthesize the material. Here we report our investigation of the effects and the mechanistic roles of lithium acetate to accelerate the growth of crystalline ceria nanoparticles in ozone-mediated synthesis. By increasing the mole ratio of the acetate to cerium nitrate in the reactions, the reaction yields of ceria nanoparticles were observed to increase from ca. 10% to up to over 90% by cerium content in 30 min reactions. Microscopy images and Raman spectra of the as-synthesized nanoparticles revealed that increasing the acetate additions led to a decrease in average particle size and size range but an increase in crystallinity. Through analyzing the organic by-products in the reaction mixtures, the acetate was inferred to base-catalyze the formation of acetals and cerium complexes and accelerate the formation of Ce–O–Ce bonds and hence the growth of ceria nanoparticles through alcohol-like condensation reactions.