28 June 2007 in Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
Measurements have been performed of scintillation light intensities emitted from various inorganic scintillators irradiated with low-energy beams of highly-charged ions from an electron beam ion source (EBIS) and an electron cyclotron resonance ion source (ECRIS). Beams of xenon ions Xeq+ with various charge states between q = 2 and q = 18 have been used at energies between 5 and 17.5 keV per charge generated by the ECRIS. The intensity of the beam was typically varied between 1 and 100 nA. Beams of highly charged residual gas ions have been produced by the EBIS at 4.5 keV per charge and with low intensities down to 100 pA. The scintillator materials used are flat screens of P46 YAG and P43 phosphor. In all cases, scintillation light emitted from the screen surface was detected by a CCD camera. The scintillation light intensity has been found to depend linearly on the kinetic ion energy per time deposited into the scintillator, while up to q = 18 no significant contribution from the ions’ potential energy was found. We discuss the results on the background of a possible use as beam diagnostics, e.g. for the new HITRAP facility at GSI, Germany.
1 February 2025 in Review of Scientific Instruments
An activity of the TRIUMF automatic beam tuning program, the Bayesian optimization for Ion Steering (BOIS) method has been developed to perform corrective centroid steering of beams at the TRIUMF ISAC facility. BOIS exclusively controls the steerers for centroid correction after the transverse optics have been set according to theory. The method is fully online, easy to deploy, and has been tested in low energy and post-accelerated beams at ISAC, achieving results comparable to human operators. scaleBOIS and boundBOIS are naïve proof-of-concept solutions to preferably select beam paths with minimal steering. Repeatable and robust automated steering reduces reliance on operator expertise and operational overhead, ensuring reliable beam delivery to the experiments and thereby supporting TRIUMF’s scientific mission.
1 March 2024 in Review of Scientific Instruments
Multigap cavities are used extensively in linear accelerators to achieve velocities up to a few percent of the speed of light, driving nuclear physics research around the world. Unlike for single-gap structures, there is no closed-form expression to calculate the output beam parameters from the cavity voltage and phase. To overcome this, we propose to use a method based on the integration of the first and second moments of the beam distribution through the axially symmetric time-dependent fields of the cavity. A beam-based calibration between the model’s electric field scaling and the machine’s rf amplitudes is presented, yielding a fast online energy change method, returning cavity amplitude and phase necessary for a desired output beam energy and energy spread. The method is validated with 23Na6+ beam energy measurements.
13 April 2011 in Hyperfine Interactions
1 July 2025 in Journal of Instrumentation
In preparation for operation of multiple Rare Isotope Beams (RIBs) when the Advanced Rare Isotope Laboratory (ARIEL) becomes operational, TRIUMF embarked on a program of advanced beam tuning applications and machine learning tools. The strategy for operationalizing Bayesian optimisation for beam steering purposes is being developed. A previously reported centroid correction algorithm is used to tune accelerated charged particle beams at TRIUMF's ISAC postaccelerator facility. We present findings and results from multiple machine development experiments conducted between October and November 2024, as part of a pivot toward semi-automated machine tuning methods. These findings were instrumental in shaping the tuning strategy for the medium and high energy beam transport (MEBT, HEBT) lines at ISAC, by sequentially optimising sub-sections of the beamlines.
1 April 2022 in Journal of Physics: Conference Series
Limited types of radioactive molecules (RM) can be made inside hot-cavity targets at ISOL facilities like TRIUMF. However, extreme conditions in these targets present formidable unsolved challenges to efficient production and delivery of RM’s. Here we propose using RFQ gas-reaction cells to produce RM from radioactive ion beams (RIB) by room temperature RIB-gas chemical reactions at eV energies. Two options are possible: (1) using an ion reaction cell (IRC) that is a linear RFQ ion guide and reaction cell used as an ‘on-line ion source’, and (2) using the ARIEL RFQ cooler-buncher (ARQB). RFQ gas-cells are a controllable and efficient method to produce RM from chemical reactants that cannot be used in ISOL targets. This ‘online chemistry’ offers a way to enable groundbreaking Beyond Standard Model (BSM) physics research, using a wide diversity of new rare and exotic RM beams that would be difficult or impossible to produce in hot-cavity targets.