Collinear laser spectroscopy was performed on the nuclear ground states of the neutron-deficient isotopes $^{206,205,204}\mathrm{Fr}$. A new technique was developed to suppress hyperfine pumping in collinear laser spectroscopy of atoms. This involved high-frequency intensity modulation of narrow-linewidth laser light using fast-switching electro-optical modulators. The nuclear ground-state spins of $^{206,205,204}\mathrm{Fr}$ were determined to be 3, $9/2$, and 3, respectively. Both the changes in mean-squared charge radii and nuclear magnetic dipole moments indicate a departure from single-particle estimates.
21 December 2021 in Physical Review Accelerators and Beams
To date, beam dynamics studies and design of combined zero degree drift tube linac (DTL) structures (Kombinierte Null Grad Struktur; KONUS) have only been carried out in multiparticle codes. Quantities such as the beam envelopes are obtained by averaging over particles, whose tracking is computationally intensive for large bunch populations. Tune computations, which depend on this average, are burdensome to obtain. This has motivated the implementation of a simulation of KONUS DTLs in the code transoptr, whose Hamiltonian treatment of beam dynamics enables the integration of energy gain from the longitudinal electric field on axis while simultaneously elaborating the field in transverse directions to obtain the linear optics. The code also features an in-built space charge capability. The evolution of the beam matrix including longitudinal optics is computed in a reference Frenet-Serret frame through the time-dependent DTL cavity fields. This enables fast envelope simulations for DTLs, resulting in a variable energy sequential tune optimization capability. The implementation methodology and optimization techniques, applicable for any combination of DTL tanks and bunchers, is outlined. Comparisons with the code lorasr, in addition to beam-based measurements of a DTL are presented.
25 November 2019 in Physical Review Accelerators and Beams
Efficient tuning of complex accelerator chains requires automated procedures, themselves reliant upon beam physical models. The Isotope Separator and ACcelerator (ISAC) facility at TRIUMF requires frequent changes of beam species (isotope), mass to charge ratio and beam energy tailored to experiment requirements, which demands rapid beam tuning. In addition, emergent effects such as long term changes of energy or energy spread require beam optimization that must be based on a complete model of the accelerator. Using an envelope code to build an end-to-end simulation of the accelerator facility for operational purposes reduces computing times by 3 or 4 orders of magnitude, when compared to particle tracking codes, so that the requisite simulations may be carried out in real time, by polling control system data. Herein described is the second order Hamiltonian for an radio frequency quadrupole (RFQ), presented within the framework of the envelope code transoptr. To benchmark the transoptr model, envelope simulations of the TRIUMF-ISAC RFQ have been performed and compared with the multiparticle code parmteq.
1 February 2025 in Review of Scientific Instruments
An activity of the TRIUMF automatic beam tuning program, the Bayesian optimization for Ion Steering (BOIS) method has been developed to perform corrective centroid steering of beams at the TRIUMF ISAC facility. BOIS exclusively controls the steerers for centroid correction after the transverse optics have been set according to theory. The method is fully online, easy to deploy, and has been tested in low energy and post-accelerated beams at ISAC, achieving results comparable to human operators. scaleBOIS and boundBOIS are naïve proof-of-concept solutions to preferably select beam paths with minimal steering. Repeatable and robust automated steering reduces reliance on operator expertise and operational overhead, ensuring reliable beam delivery to the experiments and thereby supporting TRIUMF’s scientific mission.
Multigap cavities are used extensively in linear accelerators to achieve velocities up to a few percent of the speed of light, driving nuclear physics research around the world. Unlike for single-gap structures, there is no closed-form expression to calculate the output beam parameters from the cavity voltage and phase. To overcome this, we propose to use a method based on the integration of the first and second moments of the beam distribution through the axially symmetric time-dependent fields of the cavity. A beam-based calibration between the model’s electric field scaling and the machine’s rf amplitudes is presented, yielding a fast online energy change method, returning cavity amplitude and phase necessary for a desired output beam energy and energy spread. The method is validated with 23Na6+ beam energy measurements.
In preparation for operation of multiple Rare Isotope Beams (RIBs) when the Advanced Rare Isotope Laboratory (ARIEL) becomes operational, TRIUMF embarked on a program of advanced beam tuning applications and machine learning tools. The strategy for operationalizing Bayesian optimisation for beam steering purposes is being developed. A previously reported centroid correction algorithm is used to tune accelerated charged particle beams at TRIUMF's ISAC postaccelerator facility. We present findings and results from multiple machine development experiments conducted between October and November 2024, as part of a pivot toward semi-automated machine tuning methods. These findings were instrumental in shaping the tuning strategy for the medium and high energy beam transport (MEBT, HEBT) lines at ISAC, by sequentially optimising sub-sections of the beamlines.