20 February 2013 in Journal of Biomedical Materials Research Part A
30 October 2012 in Journal of Industrial Textiles
Average number of fiber-to-fiber contacts in a fibrous structure is a prerequisite to investigate the mechanical, optical and transport properties of stochastic nano-microfibrous networks. In this research work, based on theoretical analysis presented for the estimation of the number of contacts between fibers in electrospun random multilayer nanofibrous assembles, experimental verification for theoretical dependence of fiber diameter and network porosity on the fiber to fiber contacts has been provided. The analytical model formulated is compared with the existing theories to predict the average number of fiber contacts of nanofiber structures. The effect of fiber diameters and network porosities on average number of fiber contacts of nano-microfiber mats has been investigated. A comparison is also made between the experimental and theoretical number of inter-fiber contacts of multilayer electrospun random nano-microfibrous networks. It has been found that both the fiber diameter and the network porosity have significant effects on the properties of fiber-to-fiber contacts.
19 October 2016 in Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine
A major purpose of investigating the plantar pressure in patients with pain or those at risk for skin injury is to reduce the pressure below metatarsal heads, specially first and second metatarsal heads. The aim of this article is to evaluate the effects of the socks structures on the changes in plantar dynamic pressure. In this study, seven socks types with different structures for the sole area were produced. The Gaitview® AFA-50 system, a force plate, was used to measure the plantar dynamic pressure of 10 participants. The barefoot plantar dynamic pressure distribution was compared with the plantar dynamic pressure distribution with socks by two independent samples test on various zones of the foot and on different genders using SPSS software. Mann–Whitney tests were used to determine specific significant differences. The obtained results showed that the main trend was to redistribute the plantar dynamic pressure from the higher plantar pressure zones (toe and first through forth metatarsal bone regions) were decreased and as a result the plantar pressure toward the relatively lower pressure zones (fifth metatarsal bone and midfoot regions). In comparison with the barefoot condition, the cross miss structure reduced the mean pressure in the critical region of the foot (first metatarsal) for male and female subjects ( p < 0.05) and also the mock rib structure reduced the mean pressure for female subjects ( p < 0.05). In general, the results suggested wearing the socks because the socks make the plantar pressure redistributed from high to low plantar pressure zones. The results of this research indicated that wearing socks with cross miss and mock rib structures will reduce the mean plantar pressure values in forefoot area in comparison with the barefoot condition.
26 December 2018 in The Journal of the Textile Institute
HMHamed Mohammadi Mofarah
In recent decades, the use of conductive textile structures for electromagnetic shielding effectiveness has been increased. In order to reduce, mitigate or completely eliminate destructive and adverse effects of these waves. For this purpose, the Copper/Cotton core spun yarn was manufactured and the copper wires with various diameters (0.06, 0.07, 0.08 mm) as core component were used. Copper/cotton core spun yarns were knitted with two knit structures, Full Milano and 1 × 1 Rib, at machine gauge (8, 10, and 12 per inch). The electromagnetic shielding effectiveness (EMSE) was examined using ASTM D4935-10 standard at frequency range between 0.03 to 1.5 GHz. The results show that heavier and thicker samples with larger stitch density have the higher EMSE values and also Full Milano knit structure with miss stitches provide larger shielding effectiveness values than 1 × 1 Rib knit structures.
1 September 2006 in Fibers and Polymers
8 October 2019 in The Journal of the Textile Institute
In this study, 3D hemispherical forming experiments are conducted to analyze the conformability behavior of nylon 66 plain woven reinforcements with different weft densities. To make insight into the forming process, a macro finite element model is also proposed for 3D forming of a specific woven reinforcement by using the defined ‘Fabric’ material. The results show that the proposed FEM modelling is highly correlated with experimental findings in terms of forming energy values with small and insignificant errors values, which confirm well model validity. It shows that the nylon 66 composite woven reinforcement with a lower weft density exhibits a lower forming energy (toughness) and hence a higher conformability over a hemispherical surface. On the other hand, modeling outputs clearly indicate that more wrinkling intensity appear for woven reinforcement with a higher weft density.