14 September 2020 in Nature Materials
5 May 2020 in Journal of Materials Chemistry A
Up-to-date studies of water-responsive materials for energy-related applications are reviewed. Future research endeavours could advance scientific and technical challenges.
22 September 2022 in Journal of Cleaner Production
1 February 2016 in Fibers and Polymers
22 July 2016 in Textile Research Journal
Polyurethane (PU) is a unique polymeric material with excellent chemical and physical properties and is widely used in textile materials. There has been a need for superhydrophobic PU for wider applications, such as coating materials. In this research, SiO2 nanoparticle (SNP) incorporated PU webs with superhydrophobic and breathable properties were prepared by one-step sol-gel electrospinning and post-treated with a non-fluorinated water repellent chemical, n-dodecyltrimethoxysilane (DTMS). SNPs were observed to be distributed evenly all over the fiber surfaces when 1–6 wt% SNP and tetraethoxysilane (TEOS)/acetic acid solution were added. TEOS was hydrolyzed to form larger nanoparticles while developing cross-linking with aromatic groups of the PU matrix. Interestingly, the addition of 20 nm SNPs was thought to act as nucleating seeds for enhanced hydrolysis of TEOS within the PU matrix. The hierarchical surface roughness consists of different sized SNPs and polymer beads, which resulted in superhydrophobicity with water contact angles as high as 157° and shedding angles as low as 5°. Laminating PU/SNP/DTMS webs onto polyester fabrics maintained the air permeability and water vapor transmission rate, which proves the potential of the developed PU/SNP/DTMS webs for practical applications as textile laminate materials with simple processing.
28 April 2017 in Fashion and Textiles
Polystyrene (PS) has high thermal resistance thus can be applied as thermally comfortable textile. However, the application is limited due its low mechanical strength. In this study, polyamide 6 (PA6) was blended with PS to improve the mechanical strength of PS, by means of a multi-jet electrospinning. Content ratio of the blend web was measured by chemical immersion test and confocal microscopy analysis. Fiber content was in accordance with the number of syringes used for PS and PA6 respectively. The effects of content ratio on the web morphology, thermal resistance, tensile behavior, air and water vapor permeability, and surface hydrophilicity were investigated. The influence of environmental humidity during electrospinning process on three dimensional (3D) web structure was also reported. PS web produced from higher humidity had more pores and corrugations at the surface. The increased surface roughness and porosity led to the increased hydrophobicity and thermal resistance. Though the blending of PA6 with PS enhanced the mechanical strength, the added PA6 decreased air/water vapor permeability and thermal resistance. The lowered thermal resistance by the addition of PA6 was mainly attributed to higher thermal conductivity of PA6 material and lowered air content with PA6 fibers.