We demonstrate experimentally a double-clad Er:Yb co-doped dual amplifier passive mode-locked figure-of-eight fiber laser that generates high energy, width, and amplitude tunable dissipative soliton resonance square pulses. In our laser system, each loop contains an amplifier that controls a characteristic of the output pulse. The amplitude and width of the output beam can be controlled continuously but, dependently, according to the pump power of each amplifier. The pulse width can be tuned in a range of almost 360 ns while the peak power varies from 8 to 120 W. On maximum possible pumping from both sides without having a pulse break, we report square pulses with 10 μJ energy per pulse with a signal-to-noise ratio of 60 dB.
We demonstrate a widely tunable Er:Yb-doped double-clad multiple-soliton fiber laser based on nonlinear polarization rotation (NPR). Based on both an artificial birefringent filtering effect of the cavity and population inversion related gain variation, the central wavelength can be continuously tuned over 75 nm range (1545–1620 nm). Wavelength tunability is achieved by controlling both the linear loss of the cavity and the polarization controllers (PCs). This is the widest tunable range yet reported in tunable passively mode-locked erbium-doped fiber lasers.
We demonstrate a passive mode-locked Er:Yb doped double-clad fiber laser using a microfiber-based topological insulator (Bi2Se3) saturable absorber (TISA). By optimizing the cavity loss and output coupling ratio, the mode-locked fiber laser can operate in L-band with high average output power. With the highest pump power of 5 W, 91st harmonic mode locking of soliton bunches with average output power of 308 mW was obtained. This is the first report that the TISA based erbium-doped fiber laser operating above 1.6 μm and is also the highest output power yet reported in TISA based passive mode-locked fiber laser.
We have experimentally demonstrated square pulses emission from a co-doped Er:Yb double-clad fiber laser operating in anomalous dispersion DSR regime using the nonlinear polarization evolution technique. Stable mode-locked pulses have a repetition rate of 373 kHz with 2.27 µJ energy per pulse under a pumping power of 30 W in cavity. With the increase of pump power, both the duration and the energy of the output square pulses broaden. The experimental results demonstrate that the passively mode-locked fiber laser operating in the anomalous regime can also realize a high-energy pulse, which is different from the conventional low-energy soliton pulse.
We review a set of recent multiscale imaging techniques, producing high-resolution images of interest for plant sciences. These techniques are promising because they match the multiscale structure of plants. However, the use of such high-resolution images is challenging in the perspective of their application to high-throughput phenotyping on large populations of plants, because of the memory cost for their data storage and the computational cost for their processing to extract information. We discuss how this renews the interest for multiscale image processing tools such as wavelets, fractals and recent variants to analyse such high-resolution images.
We demonstrate the generation of dissipative soliton resonance square pulses from a co-doped Er:Yb double-clad fiber ring laser operating in an all anomalous dispersion regime. The obtained pulses have a repetition rate of 672 kHz and a pulse energy of 409 nJ. By carefully adjusting the polarization controllers while increasing the pump power, the square pulse can split into a series of identical equally spaced smaller square pulses up to the 13th harmonic of the fundamental repetition frequency. The average output energy of the square pulses follows a scaling law versus the harmonic order.