1 January 2023 in Physics of Fluids
This paper presents a numerical study of the dynamics of an initially spherical bubble collapse near an oscillating rigid wall with a large amplitude; the wall oscillating amplitude is greater than 1% of the initial maximum bubble radius. Numerical simulations were conducted using a compressible two-phase flow model and the volume of fluid (VOF) interphase-sharpening technique on a general curvilinear moving grid. The numerical results for bubbles in the free field and near a wall were computed and compared with published experimental data. To study the effects of the oscillating wall on bubble collapse, a sinusoidal function was used for wall oscillation. The initial bubble conditions were set as a Rayleigh bubble located above the rigid wall at a dimensionless bubble-boundary distance with initial phases of 0{degree sign} and 180{degree sign}. During bubble collapse, the interface deformation, jetting behavior, bubble collapse time, and bubble migration were determined. Violent collapse of the bubble, jetting behavior, and shock propagation from the significant effects of the oscillating wall were observed in simulation cases with different wall motions. The effects of the non-dimensional amplitude scale and non-dimensional period timescale were considered with the initial phases in the problem. The trend lines of typical characteristics and critical points of bubble collapse were determined.
11 August 2024 in Ocean Engineering
6 August 2024 in Ocean Engineering
26 April 2004 in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
JJJoseph Paul Jayachandran
Recently, a method for fabricating air channels using a photodefinable sacrificial material (Unity 2203P) with acid-catalyzed degradation at low temperature was reported [J. P. Jayachandran et al. J Microelectromech. Syst. 12, 147 (2003)]. The acid is created via a ‘photoacid’ generator (PAG) either photolytically (when exposed to UV irradiation) or thermolytically (when heated to the decomposition temperature of the PAG). This approach to the fabrication of micro air-channel structures using low-temperature decomposable sacrificial materials has applications to air-gap formation for electrical/optical interconnects, microelectromechanical systems, microfluidics, and microreactors. In this study, the surface characteristics of the silica surface after the decomposition of Unity 2203P was explored. It was found that the surface inside the air-channel after low-temperature Unity 2203P decomposition was hydrophilic and was then converted to hydrophobic after higher-temperature treatment. The modification of the silicon surface using silane-based chemistries and a method for creating alternating hydrophobic/hydrophilic textures within a buried air channel has been demonstrated. Trifluoropropyl dimethylchlorosilane was the most effective surface treatment for creating hydrophobic channels. The hydrophobic/hydrophilic nature of the silicon surfaces is shown by the contact angle measurements and x-ray photoelectron spectroscopy analyses.