1 August 2015 in Ecological Engineering
17 November 2017 in Scientific Reports
The global contamination of water resources with inorganic and organic micropollutants, such as metals and pharmaceuticals, poses a critical threat to the environment and human health. Herein, we report on a bio-derived chitosan-EDTA-β-cyclodextrin (CS-ED-CD) trifunctional adsorbent fabricated via a facile and green one-pot synthesis method using EDTA as a cross-linker, for the adsorption of toxic metals and organic micropollutants from wastewater. In this system, chitosan chain is considered as the backbone, and the immobilized cyclodextrin cavities capture the organic compounds via host-guest inclusion complexation, while EDTA-groups complex metals. The thoroughly characterized CS-ED-CD was employed for batch adsorption experiments. The adsorbent displayed a monolayer adsorption capacity of 0.803, 1.258 mmol g−1 for Pb(II) and Cd(II) respectively, while a heterogeneous sorption capacity of 0.177, 0.142, 0.203, 0.149 mmol g−1 for bisphenol-S, ciprofloxacin, procaine, and imipramine, respectively. The adsorption mechanism was verified by FT-IR and elemental mapping. Importantly, the adsorbent perform is effective in the simultaneous removal of metals and organic pollutants at environmentally relevant concentrations. All these findings demonstrate the promise of CS-ED-CD for practical applications in the treatment of micropollutants. This work adds a new insight to design and preparation of efficient trifunctional adsorbents from sustainable materials for water purification.
24 February 2013 in Environmental Science and Pollution Research
23 October 2019 in Journal of Breath Research
The analysis of exhaled breath is drawing a high degree of interest in the diagnostics of various diseases, including lung cancer. Electronic nose (E-nose) technology is one of the perspective approaches in the field due to its relative simplicity and cost efficiency. The use of an E-nose together with pattern recognition algorithms allow ‘breath-prints’ to be discriminated. The aim of this study was to develop an efficient online E-nose-based lung cancer diagnostic method via exhaled breath analysis with the use of some statistical classification methods. A developed multisensory system consisting of six metal oxide chemoresistance gas sensors was employed in three temperature regimes. This study involved 118 individuals: 65 in the lung cancer group (cytologically verified) and 53 in the healthy control group. The exhaled breath samples of the volunteers were analysed using the developed E-nose system. The dataset obtained, consisting of the sensor responses, was pre-processed and split into training (70%) and test (30%) subsets. The training data was used to fit the classification models; the test data was used for the estimation of prediction possibility. Logistic regression was found to be an adequate data-processing approach. The performance of the developed method was promising for the screening purposes (sensitivity—95.0%, specificity—100.0%, accuracy—97.2%). This shows the applicability of the gas-sensitive sensor array for the exhaled breath diagnostics. Metal oxide sensors are highly sensitive, low-cost and stable, and their poor sensitivity can be enhanced by integrating them with machine learning algorithms, as can be seen in this study. All experiments were carried out with the permission of the N.N. Petrov Research Institute of Oncology ethics committee no. 15/83 dated March 15, 2017.
1 January 2015 in Chemical Engineering Journal
1 November 2017 in Journal of Photochemistry and Photobiology A: Chemistry