Scalable approaches for synthesis and integration of proton selective atomically thin 2D materials with proton conducting polymers can enable next-generation proton exchange membranes (PEMs) with minimal crossover of reactants or undesired species while maintaining adequately high proton conductance for practical applications. Here, we systematically investigate facile and scalable approaches to interface monolayer graphene synthesized via scalable chemical vapor deposition (CVD) on Cu foil with the most widely used proton exchange polymer Nafion 211 (N211, ∼25 μm thick film) via (i) spin-coating a ∼700 nm thin Nafion carrier layer to transfer graphene (spin + scoop), (ii) casting a Nafion film and cold pressing (cold press), and (iii) hot pressing (hot press) while minimizing micron-scale defects to <0.3% area. Interfacing CVD graphene on Cu with N211 via cold press or hot press and subsequent removal of Cu via etching results in ∼50% lower areal proton conductance compared to membranes fabricated via the spin + scoop method. Notably, the areal proton conductance can be recovered by soaking the hot and cold press membranes in 0.1 M HCl, without significant damage to graphene. We rationalize our finding by the significantly smaller reservoir for cation uptake from Cu etching for the ∼700 nm thin carrier Nafion layer used for spin + scoop transfer compared to the ∼25 μm thick N211 film for hot and cold pressing. Finally, we demonstrate performance in H2 fuel cells with power densities of ∼0.23 W cm−2 and up to ∼41–54% reduction in H2 crossover for the N211|G|N211 sandwich membranes compared to the control N211|N211 indicating potential for our approach in enabling advanced PEMs for fuel cells, redox-flow batteries, isotope separations and beyond.
Hexagonal boron nitride (hBN) is an important 2D material for van der Waals heterostructures, single photon emitters, and infrared nanophotonics. The optical characterization of mono‐ and few‐layer samples of hBN however, remains a challenge as the material is almost invisible optically. Here, phase‐resolved sum‐frequency microscopy is introduced as a technique for imaging monolayers of hBN grown by chemical vapor deposition (CVD) and visualizing their crystal orientation. Femtosecond mid‐infrared (IR) and visible laser pulses are used for sum‐frequency generation (SFG), which is imaged in a wide‐field optical microscope. The IR laser resonantly excites a phonon of hBN that leads to an ≈800‐fold enhancement of the SFG intensity, making it possible to image large 100 × 100 µm 2 sample areas in less than 1 s. Heterodyne detection combined with azimuthal sample rotation further provides full crystallographic information. Combined knowledge of topography and crystal orientation reveals that triangular domains of CVD‐grown monolayer hBN have nitrogen‐terminated zigzag edges. Overall, SFG microscopy is an ultra‐sensitive tool with the potential to image crystal structure, strain, stacking sequences, and twist angles in a wide range of van der Waals structures, where locating and identifying monolayer regions and interfaces with broken inversion symmetry is of paramount importance.