5 November 2021 in Science
Selective subatomic separations: Membranes are thin materials used to selectively separate gases or liquids and are used on a range of scales from benchtop experiments to industrial processes. Challenges arise in separating materials with very similar sizes or chemical properties, particularly at the smallest scales. Kidambi et al . review advances in using atomically thin two-dimensional materials such as graphene or hexagonal boron nitride for the separation of subatomic species, including electrons, hydrogen isotopes, and gases. The authors explore the scope to scale up the sizes of these membranes and their potential use in applications relating to energy, microscopy, and electronics. —MSL
5 May 2025 in Energy & Fuels
20 April 2022 in Journal of Materials Chemistry A
MBMichael S. H. Boutilier
Selective proton (H+) permeation through the atomically thin lattice of graphene and other 2D materials offers new opportunities for energy conversion/storage and novel separations. Practical applications necessitate scalable synthesis via approaches such as chemical vapor deposition (CVD) that inevitably introduce sub-nanometer defects, grain boundaries and wrinkles, and understanding their influence on H+ transport and selectivity for large-area membranes is imperative but remains elusive. Using electrically driven transport of H+ and potassium ions (K+) we probe the influence of intrinsic sub-nanometer defects in monolayer CVD graphene across length-scales for the first time. At the micron scale, the areal H+ conductance of CVD graphene (∼4.5–6 mS cm−2) is comparable to that of mechanically exfoliated graphene indicating similarly high crystalline quality within a domain, albeit with K+ transport (∼1.7 mS cm−2). However, centimeter-scale Nafion|graphene|Nafion devices with several graphene domains show areal H+ conductance of ∼339 mS cm−2 and K+ conductance of ∼23.8 mS cm−2 (graphene conductance for H+ is ∼1735 mS cm−2 and for K+ it is ∼47.6 mS cm−2). Using a mathematical-transport-model and Nafion filled polycarbonate track etched supports, we systematically deconstruct the observed orders of magnitude increase in H+ conductance for centimeter-scale CVD graphene. The mitigation of defects (>1.6 nm), wrinkles and tears via interfacial polymerization results in a conductance of ∼1848 mS cm−2 for H+ and ∼75.3 mS cm−2 for K+ (H+/K+ selectivity of ∼24.5) via intrinsic sub-nanometer proton selective defects in CVD graphene. We demonstrate atomically thin membranes with significantly higher ionic selectivity than state-of-the-art proton exchange membranes while maintaining comparable H+ conductance. Our work provides a new framework to assess H+ conductance and selectivity of large-area 2D membranes and highlights the role of intrinsic sub-nanometer proton selective defects for practical applications.
3 June 2019 in ACS Sustainable Chemistry & Engineering
25 July 2023 in Materials Advances
Incorporating atomically thin graphene into proton exchange membranes (PEMs) via scalable and facile processes presents the potential for advancing energy conversion and storage applications while mitigating persistent issues of undesired species crossover.
14 February 2024 in Nanoscale
Scalable approaches for synthesis and integration of proton selective atomically thin 2D materials with proton conducting polymers can enable next-generation proton exchange membranes (PEMs) with minimal crossover of reactants or undesired species while maintaining adequately high proton conductance for practical applications. Here, we systematically investigate facile and scalable approaches to interface monolayer graphene synthesized via scalable chemical vapor deposition (CVD) on Cu foil with the most widely used proton exchange polymer Nafion 211 (N211, ∼25 μm thick film) via (i) spin-coating a ∼700 nm thin Nafion carrier layer to transfer graphene (spin + scoop), (ii) casting a Nafion film and cold pressing (cold press), and (iii) hot pressing (hot press) while minimizing micron-scale defects to <0.3% area. Interfacing CVD graphene on Cu with N211 via cold press or hot press and subsequent removal of Cu via etching results in ∼50% lower areal proton conductance compared to membranes fabricated via the spin + scoop method. Notably, the areal proton conductance can be recovered by soaking the hot and cold press membranes in 0.1 M HCl, without significant damage to graphene. We rationalize our finding by the significantly smaller reservoir for cation uptake from Cu etching for the ∼700 nm thin carrier Nafion layer used for spin + scoop transfer compared to the ∼25 μm thick N211 film for hot and cold pressing. Finally, we demonstrate performance in H2 fuel cells with power densities of ∼0.23 W cm−2 and up to ∼41–54% reduction in H2 crossover for the N211|G|N211 sandwich membranes compared to the control N211|N211 indicating potential for our approach in enabling advanced PEMs for fuel cells, redox-flow batteries, isotope separations and beyond.