19 November 2014 in Physical Review X
In this paper, we investigate a type of anisotropic, acoustic complementary metamaterial (CMM) and its application in restoring acoustic fields distorted by aberrating layers. The proposed quasi two-dimensional (2D), nonresonant CMM consists of unit cells formed by membranes and side branches with open ends. Simultaneously, anisotropic and negative density is achieved by assigning membranes facing each direction ( and directions) different thicknesses, while the compressibility is tuned by the side branches. Numerical examples demonstrate that the CMM, when placed adjacent to a strongly aberrating layer, could acoustically cancel out that aberrating layer. This leads to dramatically reduced acoustic field distortion and enhanced sound transmission, therefore virtually removing the layer in a noninvasive manner. In the example where a focused beam is studied, using the CMM, the acoustic intensity at the focus is increased from 28% to 88% of the intensity in the control case (in the absence of the aberrating layer and the CMM). The proposed acoustic CMM has a wide realm of potential applications, such as cloaking, all-angle antireflection layers, ultrasound imaging, detection, and treatment through aberrating layers.
29 April 2013 in IEEE Journal of Selected Topics in Quantum Electronics
Light emitting devices based on Si quantum dots/SiO2 multilayers with dot size of 2.5 nm have been prepared. Bright white light emission is achieved under the dc driving conditions and the turn-on voltage of the device is as low as 5 V. The frequency-dependent electroluminescence intensity was observed under ac conditions of square and sinusoidal wave. It was found that the emission wavelength changes with frequency when sinusoidal ac is applied. The degradation of emission intensity is less than 12% after 3 h for ac driving condition, exhibiting the better device stability compared to the dc driving one.
27 December 2024 in Fire and Materials