1 February 2014 in Russian Electrical Engineering
Variants of excitation systems of low-speed synchronous machines with tangential and radial magnetization of permanent magnets are considered. Based on magnetic-field simulation using the finite-element method, different excitation systems are compared and the rotary-speed range is determined that should be preferred for one or another form of permanent magnets.
1 February 2017 in Russian Electrical Engineering
A floating buoy absorber that allows direct conversion of wave energy into electricity using a linear generator is a simple, but promising, device for conversion of wave energy. Results of studies of direct conversion of wave energy using a moored floating point absorber and linear synchronous generator are considered in this paper. The average power and performance of a linear synchronous generator have been determined for a significant wave. An algorithm for calculations of equivalent frequencies and emf amplitudes has been suggested for a modular design of the linear synchronous generator. The analytical expressions and dependences to determine the number of pole pairs and modules, as well as the main dimensions of the machine, have been obtained. It has been concluded that it is necessary to increase the number of poles of a linear generator to obtain an efficient design with reduced weight and overall dimensions. Application of the concentrated winding and permanent magnets with a tangential position has been justified. The parameters of electromagnetic fields and the synchronous generator for different operational conditions have been determined by the finite-element method. The design data and parameters of the six-module, 16-pole SLGPM-30-16 permanent magnet linear generator with a rating power of 30 kW are considered. The design has been optimized by calculations of the electromagnetic field; as a result, a weight of the generator has been reduced and much higher specific ratings than those in similar developments and in other devices for converting ocean-wave energy have been obtained.
1 November 2019 in IOP Conference Series: Materials Science and Engineering
The paper deals with a new design of a low-speed disk permanent magnet axial flux synchronous machine for decentralized power generation, which has improved weight-size parameters. In the new design the value of the air gap value is reduced by removing all inter-coil connections from the gap and also a concentrated winding with a high winding coefficient is applied. A two-rotor prototype of this design is created (150 W, 83 V, 250 rpm) and its magnetic circuit and the concentrated windings arrangement are described, as well as the results of the machine experimental study. The 2D finite element analysis is used to determine the effect of the air gap value effect on the disk slotless generator parameters. The method of rational choice of the machine main dimensions and the parameters of its winding according to nominal data and electromagnetic loads limitations are presented. Comparison of parameters and characteristics of a 20-pole-pair 5 kW synchronous wind generator with the new design and cylindrical one with tangential magnetization is performed. The proposed slotless design exceeds the cylindrical one in efficiency and requires less material costs. The limitations are the higher value of the outer machine diameter and the required large magnets mass.