1 April 2022 in Journal of Food Engineering
1 January 2022 in Brazilian Journal of Food Technology
The fortification of dairy beverages is a widely developed strategy using non-heme or heme iron. Heme iron has a higher bioavailability. The investigation aimed to elaborate pasteurized milk with fortified chocolate flavor with heme iron that has good sensory acceptability. The preparation of the flavored milk was carried out based on the regulations and heme iron, obtained from a commercial source of whole blood of porcine origin, was added before the pasteurization process to achieve its complete dilution. The concentration of iron and chocolate flavoring was established as variables in order to evaluate the optimal formulation based on Sensory Acceptability (SA). The experimental design was a 32 factorial design in which eight formulations were established, which were sensory acceptability evaluated by a total of 35 school-age children, aged between 8 and 11 years using a five-point facial hedonic scale. The results of the analysis of variance and optimization of the response showed that SA was 4.71 (on a scale of 1 to 5) for a fortification of 6.76 mg Fe kg-1 sample and a chocolate concentration of 2.0 g kg-1 sample. The physicochemical characterization indicated a higher percentage of carbohydrates, a higher concentration of iron (9.3 mg Fe kg-1 sample) and vitamin C (349.0 mg kg-1 sample) with respect to fresh milk. According to the physicochemical and microbiological results, the approximate life time of the beverage was 5 days, which is in accordance with Peruvian regulations. These results showed a method of fortification of flavored milk that allowed the use of heme iron, whose content could contribute to the daily requirement of this mineral in children aged between 8 and 11 years old (8 mg of iron per day).
1 April 2025 in Italian Journal of Food Science
This investigation focuses on designing a 400 L pilot reactor for extracting proteins from Spirulina using the method of scale-up dimensionless numbers. The first step was to determine the factors to study the extraction at 0.5 L, such as temperature, time, and agitation. Then, by using statistical methods, we identified the optimal extraction yield point. Subsequently, at the 4 L scale, we tested different impellers to find specific dimensionless number ratios, which were useful in designing the 400 L reactor, in addition to estimating stirring speeds for maximum protein extraction. The next step in this process is the isolation of protein.
15 April 2025 in African Journal of Food, Agriculture, Nutrition and Development
UIUniversidad Nacional de Ingeniería
Universidad Nacional de Ingeniería
+1
The improper disposal of agro-industrial waste has emerged as a crucial environmental issue. Therefore, the extraction of valuable compounds from these residues presents a promising strategy to mitigate their environmental impact while promoting resource efficiency. Prickly pear (Opuntia ficus-indica) peels, which constitute about 45% of the whole fruit, represent an abundant and significant by-product of food processing. These peels have garnered scientific interest due to their potential as a sustainable source of pectin, a polysaccharide widely used in the food and pharmaceutical industries. Therefore, the aim of this research was to extract and characterize pectin obtained from prickly pear peels using citric acid as an environmentally friendly solvent. The effects of temperature and pH on pectin yield were evaluated using a central composite design, which allowed the identification of significant interactions and effects of these factors. The results revealed that pH significantly influences (p = 0.001) pectin yield, while temperature is an important factor to take into account during experiments (p = 0.089). The optimal conditions were found to be a temperature of 94.1°C and a pH of 1.8, under which a predicted pectin yield of 11.1% was obtained. Physicochemical characterization of the extracted pectin showed that its equivalent weight ranged from 224.2 to 897.8 g/mol. Methoxyl content varied between 3.6% and 5.0%, while degrees of esterification and anhydrouronic acid content ranged from 20.5% to 59.2% and from 48.0% to 98.6%, respectively. The degree of esterification of 20.5% at the optimal pH of 1.8 classified this pectin as low-ester pectin, which has distinct gelling and functional properties suitable for various applications. These results suggest that pH significantly affects both pectin yield and its physicochemical properties. In conclusion, prickly pear peels, typically considered waste, have the potential to be a viable and sustainable source of pectin. The extracted pectin exhibits physicochemical characteristics comparable to those of commercial pectins, highlighting its potential for industrial utilization in food formulations. Key words: prickly pear peel, pectin, citric acid, acid hydrolysis, green process
1 January 2025 in Revista Colombiana de Entomología
Rearing the laboratory vector Aedes aegypti (Diptera: Culicidae), a disease vector, necessitated diets nutritionally rich in protein and carbohydrates, yet low in fat. The objective of this study was to evaluate and compare the effects of various diets on larval and adult stages, with a specific focus on wing size. Six diets were compared: CIETROP-CC concentrate, fish-based diets (Nutrafin-NF and Aqua One-AO), carnivore-based diets (Ricocan-RC and Supercat-SC), and brewer's yeast (LV). The development of larval stages was assessed using Kaplan-Meier survival analysis, while wing length was compared using Mood's median test. The developmental duration from larva to adult was consistent across all six diets, averaging 13 days. Larvae fed LV exhibited a lower survival rate (88%) compared to the other diets (99%). Female wing size ranged from 2.81 to 2.93 mm, with a mean of 2.88 mm and a standard deviation of 0.12, while male wing size ranged from 2.18 to 2.28 mm, with a mean of 2.23 mm and a standard deviation of 0.17. All diets supported satisfactory larval development, with no significant differences observed in larval survival or developmental duration (P > 0.05). Notably, the CIETROP-CC and commercial diets yielded similar results. These findings indicate that the laboratory-prepared diet exhibited comparable performance to the other five diets in terms of survival and developmental rates. Further analysis will enable the determination of its specific nutritional composition. The results underscore the efficacy of commercial diets in supporting larval.
22 February 2024 in Biotempo
El objetivo fue relacionar el comportamiento alimentario con el índice de masa corporal y actividad física de estudiantes universitarios peruanos. Se encuestaron a 237 alumnos de la Universidad Nacional Federico Villarreal, Lima, Perú y 163 alumnos de la Universidad Nacional de Ingeniería, Lima, Perú en el año 2022, utilizando un formulario en línea cuyos ítems se distribuyeron en datos demográficos para caracterizar a los estudiantes y su comportamiento alimentario. Se empleó la escala Likert. Se analizaron los datos con el Excel de Microsoft Office. Se obtuvo que el Índice de Masa Corporal (IMC) promedio de los estudiantes es 24,5, ubicándose dentro de la clasificación normal, suelen ingerir más alimentos elaborados en sus hogares, la calidad nutricional está sujeta a la accesibilidad por tiempo y dinero, suelen consumir el almuerzo omitiendo otras comidas. Un bajo porcentaje considera tener buenos hábitos alimentarios. Para el grupo en estudio la actividad física se redujo durante el desarrollo de sus estudios. El comportamiento de selección de alimento por tipo de procesamiento es similar para ambos sexos, dando prioridad para los de IMC normal a la ingesta de alimentos frescos y cocidos.