15 September 2021 in Journal of Fluid Mechanics
The flow physics of inertio-elastic turbulent Taylor–Couette flow for a radius ratio of $0.5$ in the Reynolds number ( $Re$ ) range of $500$ to $8000$ is investigated via direct numerical simulation. It is shown that as $Re$ is increased the turbulence dynamics can be subdivided into two distinct regimes: (i) a low $Re \leqslant 1000$ regime where the flow physics is essentially dominated by nonlinear elastic forces and the main contribution to transport and mixing of momentum, stress and energy comes from large-scale flow structures in the bulk region and (ii) a high $Re \geqslant 5000$ regime where inertial forces govern the flow physics and the flow dynamics is mainly governed by small-scale flow structures in the near-wall region. Flow–microstructure coupling analysis reveals that the elastic Görtler instability in the near-wall region is triggered via significant polymer extension and commensurately high hoop stresses. This instability gives rise to small-scale elastic vortical structures identified as elastic Görtler vortices which are present at all $Re$ considered. In fact, these vortices develop herringbone streaks near the inner wall that have a longer average life span than their Newtonian counterparts due to their elastic origin. Examination of the budgets of mean streamwise enstrophy, mean kinetic energy, turbulent kinetic energy and Reynolds shear stress demonstrates that increasing fluid inertia hinders the generation of elastic stresses, leading to a monotonic reduction of the elastic-related effects on the flow physics.
30 January 2023 in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
This retrospective aims to present a coherent history of important findings in direct numerical simulations and experiments in turbulent Taylor–Couette (TC) flow of dilute polymeric solutions in the last decade. Specifically, the sequence of flow transitions due to a continuous increase of fluid elasticity from classical Newtonian, to inertially and in turn to elastically dominated, and finally to the inertialess purely elastic turbulence, is presented. In each elastically modified flow state, the drag modification, coherent flow structures, velocity and elastic stress statistics, mechanism of turbulent kinetic energy production, spectral features as well as the self-sustaining cycles of turbulence, are discussed. Finally, to provide a broader perspective, an overview of important similarities and differences between elastically induced turbulence in prototypical curvilinear and rectilinear shear flows including the curvature-free limit of TC flow, namely, the spanwise-rotating plane Couette flow, is presented. This article is part of the theme issue ‘Taylor–Couette and related flows on the centennial of Taylor’s seminal Philosophical Transactions paper (part 1)’.
13 January 2023 in Physical Review Fluids
Direct numerical simulation of purely elastic turbulence (ET) in the Taylor-Couette flow of dilute polymer solutions is used to identify the dominant flow structures, namely, unsteady diwhirls that almost span the entire gap and axially and azimuthally elastic waves that occupy the inner rotating cylinder region to midgap. In accord with experiment, the azimuthal wave speed increases monotonically with enhanced and it travels nearly 50 times faster than the axial waves. The interaction of elastic waves with unsteady diwhirls leads to stochastic or chaotic cycles of polymer stretch and relaxation and commensurate fluctuations in elastic stresses over a broad range of spatiotemporal frequency that produce turbulent kinetic energy and sustain turbulent dynamics. To this end, the self-sustaining cycle of ET is elucidated. Overall, this study paves the way for mechanistic understanding of this inertia less turbulence in curvilinear flows.
24 July 2025 in Journal of Fluid Mechanics
The effect of Stokes number on turbulence modulation in particle-laden channel flow is investigated through four-way coupled point-particle direct numerical simulations, with the mass loading fixed at 0.6 and the friction Stokes number $St^+$ varying from 3 to 300. A full transition pathway is observed, from a drag-enhanced to a drag-reduced regime, eventually approaching the single-phase state as $St^+$ increases towards 300. A set of transport equations for the particle phase is derived analytically to characterise the interphase coupling, within the framework of the point-based statistical description of particle-laden turbulence. By virtue of this, two dominant mechanisms are identified and quantitatively characterised: a positive, particle-induced extra transport that decreases monotonically with increasing $St^+$ , and a negative, particle-induced extra dissipation that varies non-monotonically with $St^+$ . The coupling of these two mechanisms leads to a direct contribution of the particle phase to the shear stress balance, the turbulent kinetic energy budgets and the Reynolds stress budgets. Consequently, as $St^+$ increases, the self-sustaining cycle of near-wall turbulence transitions from being augmented to being suppressed and, eventually, returns to the single-phase state. This gives rise to an indirect effect, manifested as a non-monotonic modulation of Reynolds shear stress and turbulence production rate. Taken together, complex interplays between particle-modified turbulent transport, particle-induced extra transport and extra dissipation are analysed and summarised, providing a holistic physical picture composed of consistent interpretations of turbulence modulation induced by small heavy particles.
1 March 2023 in Journal of Fluid Mechanics
The existence of a maximum drag enhancement (MDE) asymptote at high rotation ( $Ro$ ) and Weissenberg ( $Wi$ ) numbers in turbulent viscoelastic spanwise-rotating plane Couette flow has been demonstrated. Specifically, it is shown that above a critical $Wi$ , drag enhancement plateaus and the MDE asymptote is realized in a broad range of $Ro$ . The mean velocity profiles at MDE appear to closely follow a log-law profile that has a nearly identical slope but different intercepts as a function of $Ro$ . Much like the maximum drag reduction (MDR) asymptote, the logarithmic function in MDE is closely followed if the mean velocity is plotted using the traditional inner variable scaling; however, the logarithmic function is not well defined when examined by the indicator function. Hence, in this study, we have used the logarithmic fit as a visual guide for the mean velocity profile. Last and perhaps the most intriguing finding of this study is that MDE occurs in the elasto-inertial turbulence (EIT) flow state; hence, it is mainly sustained by elastic forces much like the MDR flow state. To that end, a universal picture of elastically induced drag modification asymptotes is emerging, namely these asymptotic states are an inherent property of the elastically sustained EIT flow state.
27 November 2024 in Journal of Fluid Mechanics
Turbulent flow induced by elastorotational instability in viscoelastic Taylor–Couette flow (TCF) with Keplerian rotation is analogous to a turbulent accretion disk destabilized by magnetorotational instability. We examine this novel viscoelastic Keplerian turbulence via direct numerical simulations (DNS) for the shear Reynolds number ( $Re$ ) ranging from $10^2$ to $10^4$ . The observed characteristic flow structure consists of penetrating streamwise vortices with axial length scales much smaller than the gap width, distinct from the classic centrifugally induced Taylor vortices, which have axial lengths of the gap width. These intriguing vortices persist for the wide $Re$ range considered and give rise to intriguing scaling behaviour in key flow quantities. Specifically, the characteristic axial length of the penetrating vortices is shown to scale as $Re^{-0.22}$ ; the angular momentum transport scales as $Re^{0.42}$ ; the kinetic and elastic boundary-layer thicknesses based on angular velocity and hoop stress near the inner cylinder wall scale as $Re^{-0.48}$ and $Re^{-0.49}$ , respectively. This implies that the viscoelastic Keplerian turbulence belongs to the classical turbulent regime of TCF with the Prandtl–Blasius-type boundary layer. Furthermore, we present an analytical relation between the viscous and elastic dissipation rates of kinetic energy and the angular momentum transport and in turn demonstrate its validity using our DNS data. This study has paved the way for future research to explore astrophysics-related Keplerian turbulence and angular momentum transport via the scaling relations of the analogous TCF of dilute polymeric solutions.