4 April 2024 in Journal of Fluid Mechanics
The geostrophic turbulence in rapidly rotating thermal convection exhibits characteristics shared by many highly turbulent geophysical and astrophysical flows. In this regime, the convective length and velocity scales and heat flux are all diffusion-free, i.e. independent of the viscosity and thermal diffusivity. Our direct numerical simulations (DNS) of rotating Rayleigh–Bénard convection in domains with no-slip top and bottom and periodic lateral boundary conditions for a fluid with the Prandtl number $Pr=1$ and extreme buoyancy and rotation parameters (the Rayleigh number up to $Ra=3\times 10^{13}$ and the Ekman number down to $Ek=5\times 10^{-9}$ ) indeed demonstrate all these diffusion-free scaling relations, in particular, that the dimensionless convective heat transport scales with the supercriticality parameter $\widetilde {Ra}\equiv Ra\, Ek^{4/3}$ as $Nu-1\propto \widetilde {Ra}^{3/2}$ , where $Nu$ is the Nusselt number. We further derive and verify in the DNS that with the decreasing $\widetilde {Ra}$ , the geostrophic turbulence regime undergoes a transition into another geostrophic regime, the convective heat transport in this regime is characterized by a very steep $\widetilde {Ra}$ -dependence, $Nu-1\propto \widetilde {Ra}^{3}$ .
15 September 2021 in Journal of Fluid Mechanics
The flow physics of inertio-elastic turbulent Taylor–Couette flow for a radius ratio of $0.5$ in the Reynolds number ( $Re$ ) range of $500$ to $8000$ is investigated via direct numerical simulation. It is shown that as $Re$ is increased the turbulence dynamics can be subdivided into two distinct regimes: (i) a low $Re \leqslant 1000$ regime where the flow physics is essentially dominated by nonlinear elastic forces and the main contribution to transport and mixing of momentum, stress and energy comes from large-scale flow structures in the bulk region and (ii) a high $Re \geqslant 5000$ regime where inertial forces govern the flow physics and the flow dynamics is mainly governed by small-scale flow structures in the near-wall region. Flow–microstructure coupling analysis reveals that the elastic Görtler instability in the near-wall region is triggered via significant polymer extension and commensurately high hoop stresses. This instability gives rise to small-scale elastic vortical structures identified as elastic Görtler vortices which are present at all $Re$ considered. In fact, these vortices develop herringbone streaks near the inner wall that have a longer average life span than their Newtonian counterparts due to their elastic origin. Examination of the budgets of mean streamwise enstrophy, mean kinetic energy, turbulent kinetic energy and Reynolds shear stress demonstrates that increasing fluid inertia hinders the generation of elastic stresses, leading to a monotonic reduction of the elastic-related effects on the flow physics.
6 October 2022 in Journal of Fluid Mechanics
Three-dimensional elastic turbulence in Taylor–Couette flows of dilute polymer solutions has been realized and thoroughly investigated via direct numerical simulations. A novel flow transition pathway from elastically dominated turbulence to solitary vortex pairs (or diwhirls) and eventually to elastic turbulence is observed by decreasing the fluid inertia ( $Re$ ) over seven orders of magnitude, i.e. from $Re=1000$ to $0.0001$ . The dominant spatio-temporal flow features in the elastic turbulence regime are those of large-scale unsteady diwhirls and small-scale axial and azimuthal travelling waves in the outer and inner halves of the gap, respectively. Moreover, it is conclusively shown that production of turbulent kinetic energy in purely elastic turbulence solely arises due to the stochastic nature of polymer stretch/relaxation. Overall, based on this comprehensive numerical investigation, the differences in the underlying fluid physics that give rise to turbulent fluctuations in elastically dominated and purely elastic turbulence have been delineated.
30 January 2023 in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
This retrospective aims to present a coherent history of important findings in direct numerical simulations and experiments in turbulent Taylor–Couette (TC) flow of dilute polymeric solutions in the last decade. Specifically, the sequence of flow transitions due to a continuous increase of fluid elasticity from classical Newtonian, to inertially and in turn to elastically dominated, and finally to the inertialess purely elastic turbulence, is presented. In each elastically modified flow state, the drag modification, coherent flow structures, velocity and elastic stress statistics, mechanism of turbulent kinetic energy production, spectral features as well as the self-sustaining cycles of turbulence, are discussed. Finally, to provide a broader perspective, an overview of important similarities and differences between elastically induced turbulence in prototypical curvilinear and rectilinear shear flows including the curvature-free limit of TC flow, namely, the spanwise-rotating plane Couette flow, is presented. This article is part of the theme issue ‘Taylor–Couette and related flows on the centennial of Taylor’s seminal Philosophical Transactions paper (part 1)’.
13 January 2023 in Physical Review Fluids
Direct numerical simulation of purely elastic turbulence (ET) in the Taylor-Couette flow of dilute polymer solutions is used to identify the dominant flow structures, namely, unsteady diwhirls that almost span the entire gap and axially and azimuthally elastic waves that occupy the inner rotating cylinder region to midgap. In accord with experiment, the azimuthal wave speed increases monotonically with enhanced and it travels nearly 50 times faster than the axial waves. The interaction of elastic waves with unsteady diwhirls leads to stochastic or chaotic cycles of polymer stretch and relaxation and commensurate fluctuations in elastic stresses over a broad range of spatiotemporal frequency that produce turbulent kinetic energy and sustain turbulent dynamics. To this end, the self-sustaining cycle of ET is elucidated. Overall, this study paves the way for mechanistic understanding of this inertia less turbulence in curvilinear flows.
25 June 2024 in Journal of Fluid Mechanics
Three-dimensional direct numerical simulations of rotating Rayleigh–Bénard convection in the planar geometry with no-slip top and bottom and periodic lateral boundary conditions are performed for a broad parameter range with the Rayleigh number spanning in $5\times 10^{6}\leq Ra \leq 5\times 10^{13}$ , Ekman number within $5\times 10^{-9}\leq Ek \leq 5\times 10^{-5}$ and Prandtl number $Pr=1$ . The thermal and Ekman boundary layer (BL) statistics, temperature drop within the thermal BL, interior temperature gradient and scaling behaviours of the heat and momentum transports (reflected in the Nusselt $Nu$ and Reynolds numbers $Re$ ) as well as the convective length scale are investigated across various flow regimes. The global and local momentum transports are examined via the $Re$ scaling derived from the classical theoretical balances of viscous–Archimedean–Coriolis (VAC) and Coriolis–inertial–Archimedean (CIA) forces. The VAC-based $Re$ scaling is shown to agree well with the data in the cellular and columnar regimes, where the characteristic convective length scales as the onset length scale ${\sim } Ek^{1/3}$ , while the CIA-based $Re$ scaling and the inertia length scale $\sim (ReEk)^{1/2}$ work well in the geostrophic turbulence regime for $Ek\leq 1.5\times 10^{-8}$ . The examinations of $Nu$ , global and local $Re$ , and convective length scale as well as the temperature drop within the thermal BL and its thickness scaling behaviours, indicate that for extreme parameters of $Ek\leq 1.5\times 10^{-8}$ and $80\lesssim RaEk^{4/3}\lesssim 200$ , we have reached the diffusion-free geostrophic turbulence regime.