17 March 2021 in IEEE Microwave and Wireless Components Letters
This letter presents a novel class of compact dual-mode bandpass filters based on half-mode substrate-integrated waveguide (HMSIW) cavities. By using both TE 102 and TE 301 modes of the HMSIW rectangular cavity as resonant modes and TE 101 mode as nonresonating mode, a novel HMSIW doublet with two poles and two transmission zeros (TZs) is implemented. The TZs can be located at one side or both sides of the passband. Therefore, flexible responses can be obtained. A two-pole HMSIW filter with asymmetric response and a four-pole HMSIW filter with quasi-elliptic response have been designed, fabricated, and measured, to demonstrate and verify the proposed structure. Compared with substrate-integrated waveguide (SIW) counterparts, the dual-mode HMSIW filters have the advantage of smaller size.
1 March 2023 in IEEE Transactions on Antennas and Propagation
A broadband low-profile dual-circularly polarized (dual-CP) reflect-array (RA) cells covering both K -band and Ka -band is presented in this paper. As an anisotropic impedance surface, the functional layer is designed based on multi-resonant structure and printed on substrate with a thickness of 0.762 mm. The circuit is composed of elliptical ring, arc-shaped and rectangular metal microstrip lines. The air layer between the functional layer and the metal plate can effectively extend the cells bandwidth (BW), and the overall profile is 1.8mm. The dynamic phase and Berry phase can be adjusted by changing the size of the arc-shaped microstrip lines and the rotation of the cells. The diffraction results show that the phase of left-handed (LH) CP and right-handed (RH) CP waves can be controlled independently and reflected by high purity with the cross-polarization BW of 64% (19.72 GHz ~ 38.44 GHz). A dual-CP RA with 1013 cells is designed to realize reflect beams at θ = -20° for LHCP wave and θ = 15° for RHCP wave at 30 GHz. Furthermore, the 3-dB gain BW can cover the Ka -band and is expected to be used in wireless and satellite communication systems.
27 April 2021 in IEEE Antennas and Wireless Propagation Letters
A new type of sleeve monopole antenna with a choke structure for broadband applications is proposed in this letter. The antenna consists of a choke structure and a single-sleeve structure, which effectively broadens its impedance bandwidth. Meanwhile, the top-loading technique is applied to reduce the size. The proposed structure is designed, analyzed, and optimized. Parameters study is carried out for its working mechanism. The fabricated antenna is measured, and the measured results have good agreement with the simulated ones. The antenna shows the omnidirectional radiation with a broad impedance bandwidth ranging from 0.24 to 0.95 GHz. The proposed antenna has a potential application in wireless communication.
29 November 2023 in IEEE Antennas and Wireless Propagation Letters
In this letter, a dual-wideband dual-circularly polarized (CP) reflect-array (RA) with 1013 dual-CP RA cells is proposed. The overall size is 161 mm × 161 mm × 1.8 mm. Composed of a metal reflection plate and a substrate printed with circuits of fan-shaped, arc-shaped and rectangular patterns, current paths with different lengths can be formed and multiple resonance points can be introduced to expand the working bandwidth (BW). The -10 dB cross polarization BW of cells have reached 83.67% (16.03 GHz – 39.09 GHz). Center frequencies of the right-handed (RH) CP and left-handed (LH) CP reflected beams are designed to point along (ϕ, θ) = (90°, 20°) at 19 GHz and (ϕ, θ) = (90°, -20°) at 31 GHz. Specifically, the 3-dB gain BW of RHCP and LHCP reflected beams is 43.8% (17.3 GHz – 27.0 GHz) and 47.1% (24.5 GHz – 39.6 GHz), respectively. 1.5-dB axial ratio (AR) BWs are greater than 90.1%. The dual-wideband and dual-CP characteristics enable the proposed RA to meet the communication requirements of satellite communication transmission and reception at the same time, and become a promising candidate technology for long-distance communication for K-band and Ka-band applications.
17 May 2024 in IEEE Transactions on Antennas and Propagation
An optically transparent right-handed (RH) circularly polarized (CP) reflect-array (RA) with 3940 cells is proposed in this communication. The overall structure is composed of a 0.125 mm thick polyethylene terephthalate (PET) film with fine metal line (FML), quartz glass with a thickness of 0.5 mm, a 0.6 mm air layer, indium tin oxide (ITO) ground and a RHCP feed horn. The overall size of the reflection plane is 170 mm × 170 mm × 1.225 mm. The shaped pattern of a double arrow, two diamond, and a chain with three incomplete diamond form the circuit of unit cell. The RA cell is miniaturized (2.4 mm × 2.4 mm) by bending the corresponding current path with a line width of 40 μm. To compensate for the loss induced by the FML, we increased the resolution of the reflection plane, and the measured results showed that the peak gain and aperture efficiency (AE) reached 32.5 dBic and 54.9%, respectively. The 3-dB gain bandwidth reached 23.2% (28.5 GHz – 36 GHz), the axial ratio (AR) is less than 1.5 dB across the frequency band. These advantages such as optical transparent, high directionality and good circular polarization characteristics, make it a potential candidate for satellite communication applications.
1 October 2021 in IEEE Antennas and Wireless Propagation Letters
A dual-polarized lower-band (LB) antenna element is proposed in this paper. A pair of vertical arms and a pair of horizontal arms are designed with two cross -shaped feeding lines together for 45polarizations. The sleeve arm can suppress the scattering for high frequency electromagnetic wave, and have almost negligible effect on low frequency. Meanwhile, unobstructed space for placing the higher-band (HB) elements is reserved with surrounded scheme. The dual-band antenna (DBA) with four HB elements operating from 1.46~2.43 GHz and one LB element operating from 0.65~1.11 GHz is designed and fabricated. The simulated and measured results show that stable radiation performance and low mutual interference for LB and HB elements are achieved in DBA.