12 November 2018 in IEEE Transactions on Antennas and Propagation
In this paper, two 24 GHz horizontally polarized 1 × 8 patch antenna arrays were developed for automotive radar applications. The proposed antenna arrays offer the advantages of wide fan beams and high gain. The far-field radiation patterns are widened in the E-plane by disturbing the near-field distribution of each driven patch. In Design I, the driven patch is loaded with a parasitic loop, which functions as a director in the E-plane. Due to the directing effect, the E-plane beamwidth can be increased. The experimental verification prepared for Design I showed that a beamwidth of 130° and a gain of 12.2 dBi can be achieved through this method. To further enhance the beamwidth, another array with each patch loaded with parasitic mushroom-like elements was proposed by Design II. The PMLEs are 180° out of phase to their corresponding driven patch. The cancelation effects can be properly managed to slightly sacrifice the gain of the array in return for a wider beamwidth in the E-plane. Design II exhibits a wider beamwidth of 150° and a lower gain of 11.1 dBi.
9 April 2019 in IEEE Access
In this paper, the integration design of a millimeter-wave filtering patch antenna array fed by a substrate integrated waveguide (SIW) four-way anti-phase filtering power divider is proposed. The multilayer four-way anti-phase filtering power divider handily implemented using the intrinsic field distribution of TE 20 -mode in SIW is proposed for miniaturization. The signal of the lower substrate integrated waveguide cavity (SIWC) bandpass filter is directly coupled to the upper TE 20 -mode SIW through a coupling slot. The intrinsic field distribution of TE 20 -mode SIW is used to generate anti-phase signals. This filtering power divider can be utilized as the feeding structure of a millimeter-wave filtering antenna array. To verify the design concept, a 28-GHz SIW-fed $1\times 4$ filtering patch antenna array with three-layer substrates is designed and fabricated. The measured results show a fractional bandwidth of 5.03% ranging from 27.15 to 28.55 GHz, a peak gain of 11.1 dBi, cross-polarization levels lower than −20 dB, symmetric radiation patterns in both $E$ -plane and $H$ -plane, and high selectivity.
13 September 2022 in IEEE Antennas and Wireless Propagation Letters
This letter designs a miniaturized low-profile metasurface (MS) antenna with compact size, large bandwidth, and stable gain. First, a miniaturized MS structure using the via-wall capacitive loading is investigated. Different from the traditional square MS structure, this design loads via walls on both sides of the square patch to introduce large equivalent parallel-plate capacitance, which can reduce the size of the MS element by 50%. The stacked patches are then loaded horizontally along the side via walls to introduce additional edge capacitance for a further 10% size reduction. Finally, a miniaturized patch-via-wall MS element with small size of 0.061 λ 0 ×0.061 λ 0 can be obtained. For demonstration, the proposed miniaturized patch-via-wall MS structure is applied to realize a compact wideband antenna fed by a microstrip line through a coupling slot. Measured results show that the proposed patch-via-wall MS-based antenna can achieve a large impedance bandwidth of 43.1% (5.46∼8.46 GHz), a small aperture size of 0.348 λ 0 ×0.348 λ 0 with a high gain of 6.18 dBi, and a thin thickness of 0.07 λ 0 .
30 October 2017 in IEEE Transactions on Antennas and Propagation
A millimeter-wave series-parallel patch antenna array is presented, in which the dual-slot feeding structure is handily implemented using the intrinsic field distribution of TE20 mode in substrate integrated waveguide (SIW). One 28-GHz patch antenna element fed by the TE20-mode SIW is firstly designed, achieving a 10-dB impedance bandwidth of 10.2% and a simulated peak gain of 6.48 dBi. Based on the antenna element, a 4 × 4 array with a compact series-parallel differential feeding network is developed accordingly. Due to the novel compact SIW-based series-parallel feeding network, the antenna array can achieve superior radiation performances, which is the most highlight of this work. The simulation and measurement results of the proposed antenna array are in good agreement, demonstrating a performance of 8.5% impedance bandwidth, 19.1 dBi peak gain, symmetrical radiation patterns and low cross-polarization levels (−30 dB in E-plane and −25 dB in H-plane) in the operating frequency band of 26.65−29.14 GHz.
15 June 2020 in IEEE Transactions on Antennas and Propagation
A dual-polarized broad band-absorptive frequency selective rasorber (FSR) is proposed in this paper. The FSR has a lowpass band with low insertion loss and a broad absorption band. It is a two-layer structure formed by a lossy surface cascaded an absorptive transmission/reflection surface (ATRS), in which the ATRS is constructed by one substrate with a resistive square loop on its top side and a double square loop on its bottom side. The working mechanisms of the proposed ATRS and FSR are completely studied by using their equivalent circuit models. The ATRS retains dual stopbands of the double square loop, and suppresses the unwanted transmission pole of the double square loop. Then a broadband absorptive FSR is achieved. A sample of the proposed FSR is fabricated and measured. The measured results show that the proposed FSR has a lowpass band up to 860 MHz (|S21|≥–1 dB) and a broad absorption band with bandwidth of 95.3% from 3.84 GHz to 10.83 GHz (|S11|≤–10 dB and |S21|≤–10 dB).
17 March 2021 in IEEE Antennas and Wireless Propagation Letters
A single-layer dual-circularly polarized cavity-backed patch filtenna with wide axial-ratio (AR) bandwidth is presented in this letter. The degenerated substrate-integrated waveguide (SIW) cavity modes TE 120 /TE 210 cooperating with the patch modes TM 01 /TM 10 are utilized to achieve a wide AR bandwidth. Simultaneously, two radiation nulls, which are inherently introduced by the SIW-cavity mode TE 110 and mixed electromagnetic coupling between the cavity and patch, respectively, are realized at both band edges to achieve a bandpass filtering response. For demonstration, a sample was fabricated and tested. The measured results show that the proposed filtenna achieves an operating bandwidth of 12% with the center frequency of 10 GHz, a peak gain of 7.4 dBic, an in-band average gain of 6.7 dBic, and an out-of-band rejection level over -13 dB.