9 April 2020 in IET Electric Power Applications
Most of the conventional linear generator is constructed with either Alnico (specially AlNiCo‐9) or Neodymium iron boron (NdFeB) permanent magnets (PMs) for harvesting oceanic wave energy. Alnico is a composition of aluminium (Al), nickel (Ni), and cobalt (Co) added to iron, which is its major volumetric component. Alnico has a poor magnetic energy product, and NdFeB contains a rare earth element. To overcome this issue, a recently developed rare‐earth free iron nitride (Fe 16 N 2 ) compound‐based PM linear generator (PMLG) is proposed in this study as an alternative solution for avoiding rare earth material while obtaining high output power. To the best of authors’ knowledge, newly invented Fe 16 N 2 is not proposed, analysed, and investigated in any electrical generator. In this context, Fe 16 N 2 is proposed in a linear generator as PM for producing adequate magnetic flux. For analysis and testing the performance of the proposed material, a PMLG is designed. The performances are compared for using Fe 16 N 2 and AlNiCo PMs in the same PMLG design for a fair comparison. It is considered that the proposed PMLG is connected to a direct drive power take‐off system. Simulation results show that the proposed PMLG having Fe 16 N 2 generates 55% more electrical power than that of using AlNiCo. The voltage, current, magnetic flux linkage, power, and magnetic flux density of the proposed PMLG are investigated extensively and compared with those of AlNiCo. The finite element method is applied in the ANSYS/Maxwell software environment for testing the PMLG with the conventional and the proposed PMs as well as results are presented. The proposed design is also validated with a small laboratory prototype.
1 October 2020 in IEEE Access
In this paper, a method of winding optimization of the linear generator is proposed to increase the electrical power generation from the oceanic wave. A linear generator is designed in the ANSYS/Maxwell environment to analyze the proposed winding optimization method. The electrical and magnetic properties of the generator are extensively analyzed. The cross-sectional area and the number of turns of the copper conductor are optimized to maximize the output power. Load characteristics are also considered for different conductor sizes and turn numbers to determine a suitable operating point. A cooling system is also incorporated in the optimized linear generator to extract the thermal energy produced during the operation, which eventually enhances the electrical power generation. It is found that the optimized linear generator finally generates around 42% more electrical power compared to that of the conventional one. Therefore, the volumetric power density of the linear generator is noticeably increased with the proposed optimization method that also results in the minimization of material cost of the generator. A downscale prototype of the linear generator is constructed in the laboratory. It is expected that the proposed winding optimization method can be used in designing other linear generators.
21 June 2021 in IEEE Transactions on Applied Superconductivity
In this paper, the low reluctance superconducting direct drive linear generator (DDLG) for harvesting oceanic wave is presented. At first, a permanent magnet DDLG is designed in the ANSYS/Maxwell environment. The DDLG with both the copper and superconducting winding are characterized with finite element analysis. The DDLG is analyzed with the conventional and recently developed M5 Carlite magnetic cores. High graded neodymium iron boron permanent magnet, N46SH is selected for the DDLG to create strong magnetic field. It is analyzed that the proposed superconducting DDLG with M5 Carlite magnetic core and N46SH permanent magnet produces 294 kW more electrical power compared to that of the DDLG with copper conductor. It is also found that the stator size of the proposed DDLG is much smaller than the conventional one for designing the winding with superconducting tape.
16 October 2024 in Renewable Energy
15 August 2026 in Energy Reports