26 July 2023 in Earthquake Engineering & Structural Dynamics
1 January 2021 in Journal of Structural Engineering
Nonlinear time-history analysis is becoming a standard procedure for evaluating the seismic performance of structures. The current ASCE 7-16 allows practitioners to perform it when the acceleration demands of nonstructural components (NSCs) are required. However, the code in this version omits any suggestion regarding the methodology that should or could be used to represent the structure as a mathematical model. This investigation evaluated the acceleration demands in rigid and flexible nonstructural components using five different assessment methodologies that vary from a detailed concentrated and distributed plasticity model to a very simple model. Nonlinear static and dynamic analyses were performed on 2-, 4-, 8-, 12- and 20-story special steel moment frames to evaluate the effects that mathematical models have on the structure´s seismic response and acceleration demands on NSCs. Although results showed that detailed models are the only ones that adequately can capture structure drift deformations, it was found that even the simplest nonlinear model evaluated the acceleration demands correctly in NSCs.
1 January 2025 in JAPAN ARCHITECTURAL REVIEW
This data paper presents data obtained from E‐Defense shake‐table tests of a full‐scale, steel moment‐resisting frame (MRF) supplemented with Spines. Herein, the Spines were pin‐based columns with sufficient stiffness and strength to distribute plastic deformation evenly over the height of the MRF. The specimen was tested under two configurations: first, with the Spine rigidly connected to the MRF; second, with the Spine connected to the MRF through force‐limiting connections (FLCs). Each specimen configuration underwent earthquake simulations using ground motions with two scale factors. The tests demonstrated the expected benefits of Spines as well as the disadvantage of inducing large floor accelerations in the structure and large shear forces in the Spines. The tests also demonstrated how the FLCs can mitigate these disadvantages. This data paper reports an overview of the tests, data archive structure, and potential use of the data. The data can be used, for example, to reproduce the observations presented by the authors, to compare the dynamic response of the specimen with building specimens tested in other shake‐table test programs, to validate numerical models against the measured specimen response, or to formulate classroom exercises on system identification of linear and nonlinear systems.
1 June 2021 in Journal of Structural Engineering
Nonlinear static and dynamic analyses are increasingly being used to evaluate the seismic performance of structures. The level of detail that mathematical models should include depends on the required analysis. In a collapse performance evaluation of special steel moment frames, models must include material and element deterioration due to local geometrical instabilities that will allow triggering structural instability. However, capturing these effects in distributed plasticity models is challenging for two reasons: (1) the selection of a constitutive law that incorporates the geometrical phenomenon, and (2) the localization issues related to the material softening. This paper proposes a simple approach to implement phenomenological calibrated constitutive law that includes compression softening applied on a distributed plasticity model. Additionally, a regularization method is proposed to reduce mesh-sensitivity, ensuring an objective response. The constitutive law and the regularization method are tested under different modeling levels: material, element, and structure. Furthermore, the model is used to perform collapse analyses of 2-, 4-, 8-, 12-, and 20-story special steel moment frame buildings. The proposed model can incorporate critical features, such as flexure-axial force interaction, postpeak deterioration, and an objective global response regardless of the element discretization.
1 October 2026 in Journal of Structural Engineering
1 November 2026 in Journal of Structural Engineering
Strongback braced frames (SBFs) supplement a classic braced frame with a stiff and strong vertical steel truss, or strongback. The strongback is designed to remain essentially elastic during strong ground shaking, providing an elastic load path to more uniformly distribute drifts with building height. Although SBFs can provide enhanced performance for drift-sensitive components, their adoption in practice has been limited in part by the lack of an illustrative load path demonstrating higher-mode effects, limiting design intuition about the force demands needed to proportion the strongback components. This study proposes a multimodal capacity design (MMCD) method that uses a series of free-body diagrams to illustrate the characteristic behavior of SBFs, including estimates of the expected dynamic contributions from multiple modes. To illustrate the MMCD method, an eight-story SBF archetype with buckling-restrained braces (BRBs) was designed so that the strongback remains elastic for ground motions consistent with the maximum considered earthquake (MCE). Results illustrate the influence of the mode shape, modal combination rule, and number of modes on the ability of MMCD to estimate demands from modal pushover analysis (MPA) and nonlinear response history analysis (NRHA), both of which explicitly include higher-mode demands. Depending on the assumed mode shape, force demands estimated using MMCD were on average 0.9 to 1.7 times the median NRHA demands, providing credible force estimates comparable to those obtained from more computationally demanding methods. The free-body diagrams presented as part of MMCD can be extended to other strongback geometries and bracing configurations, providing designers with improved intuition of the force demands in SBFs and supporting the future integration of SBFs into practical design guidelines.