A new method, inspired by the gait of horses, for regulating the ground reaction force of a quadruped walking robot, is proposed. The method uses the mechanical stiffness switch with a dual‐spring structure inspired by an equine distal forelimb. This includes the use of a low‐stiffness spring activated at the moment of touchdown and a high‐stiffness spring for the support phase. This method has been applied to Jinpoong, a hydraulic quadruped walking robot, and has contributed to the robot's stable gait on uneven terrain.
1 November 2015 in Journal of Electrical Engineering & Technology
Design and Evaluation of the Unmanned Technology Research Center Exoskeleton Implementing the Precedence Walking Assistance Mechanism The lower limb exoskeleton;Walking intention;Interaction force; Assistance of the operator’s walking ability while carrying a load is a challenging area in lower limb exoskeletons. We implement an exoskeleton called the Unmanned Technology Research Center Exoskeleton (UTRCEXO), which enables the operator to walk with a load more comfortably. The UTRCEXO makes use of two types of DC motor to assist the hip and knee joints. The UTRCEXO detects the operator’s walking intention including step initiation with insole-type FSRs faster without using any bio-signals and precedes the operator’s step with a reference torque. It not only reduces interaction forces between the operator and the UTRCEXO, but also allows the operator to walk with a load more comfortably. In this paper, we present the UTRCEXO implementing the walking assistance mechanism with interaction force reduction during walking.
30 August 2014 in International Journal of Control, Automation, and Systems
We present a state-space approach to design a passivity-based dynamic output feedback controller that achieves stabilization and set-point regulation. A frequency domain analysis is performed in order to test the performances of the low-order control law against measurement noise. It is shown that the proposed control law inherently has low-pass filter property as well as it can successfully replace the measurements of derivative terms in PD control laws. Motivated by the low-pass filter property a higher-order controller is also introduced to enhance the noise reduction property. The effectiveness of the proposed control law is illustrated by numerical simulations and experimental results with a rotary inverted pendulum