This letter presents a gripper module for a snake-like robot to perform search and rescue tasks in a narrow space. The proposed gripper module has three features: (1) It can accommodate the fingers inside its body. (2) It has three fingers that can grip objects with irregular surfaces stably. (3) One of the fingers is equipped with a camera on the fingertip to search in a narrow space. To implement the above features in a small, light, and compact gripper module, we propose a novel design of a gripper module with three fingers and eight degrees of freedom. The joint configuration of the proposed gripper is unique compared with a general-type gripper. A prototype of the proposed gripper module has been integrated into a snake-like robot to demonstrate its capability of performing rescue tasks in a collapsed environment. The three features of the proposed gripper module are experimentally verified: it is light (0.4 kg), small (less than 68 mm in diameter), and powerful (grasping force = 2.48kgf).
24 May 2023 in IEEE Robotics and Automation Letters
This letter proposes a multi-degrees-of-freedom two-wheeled inverted pendulum robot (mD-TWIPR) for off-road transportation. A two-wheeled inverted pendulum robot (TWIPR), popularly known as a segway, has high mobility owing to its simple structure without steering or suspension. The proposed robot has a car-like structure with a low and elongated body that provides advantages for transporting long objects, such as pipes, or transferring patients on off-road terrain. However, a car-like TWIPR structure faces several challenges, including limited acceleration, difficulty traversing slopes, asymmetric payload, and lower ability to climb steps. To address these issues, we implemented a sliding mechanism in the mD-TWIPR. The proposed mD-TWIPR is designed to move without tilting while carrying movable mass, and tilt the torso according to the 20 $^{\circ }$ slope. It can also maintain stationary on a slope with only a small wheel torque by positioning the center of mass on the fulcrum, which is advantageous for transportation operations. Furthermore, it can climb a step using a combination of the wheel and sliding mechanism. The paper discusses the modeling and design specifications and presents a prototype and experiments to verify the proposed performance of mD-TWIPR.
A new method, inspired by the gait of horses, for regulating the ground reaction force of a quadruped walking robot, is proposed. The method uses the mechanical stiffness switch with a dual‐spring structure inspired by an equine distal forelimb. This includes the use of a low‐stiffness spring activated at the moment of touchdown and a high‐stiffness spring for the support phase. This method has been applied to Jinpoong, a hydraulic quadruped walking robot, and has contributed to the robot's stable gait on uneven terrain.
4 July 2019 in International Journal of Control, Automation, and Systems
The simulation-to-reality (sim-to-real) transfer of large-scale hydraulic robots presents a significant challenge in robotics because of the inherent slow control response and complex fluid dynamics. The complex dynamics result from the multiple interconnected cylinder structure and the difference in fluid rates of the cylinders. These characteristics complicate detailed simulation for all joints, making it unsuitable for reinforcement learning (RL) applications. In this work, we propose an analytical actuator model driven by hydraulic dynamics to represent the complicated actuators. The model predicts joint torques for all 12 actuators in under 1 $\mu$s, allowing rapid processing in RL environments. We compare our model with neural network-based actuator models and demonstrate the advantages of our model in data-limited scenarios. The locomotion policy trained in RL with our model is deployed on a hydraulic quadruped robot, BeTheX-Q, which is over 300 kg. This work is the first demonstration of a successful transfer of stable and robust command-tracking locomotion with RL on a heavy hydraulic quadruped robot, demonstrating advanced sim-to-real transferability.