20 October 2020 in IEEE/ASME Transactions on Mechatronics
We present a control scheme for video-rate atomic force microscopy with rosette pattern. The controller structure involves a feedback internal-model-based controller and a feedforward iterative learning controller. The iterative learning controller is designed to improve tracking performance of the feedback-controlled scanner by rejecting the repetitive disturbances arising from the system nonlinearities. We investigate the performance of two inversion techniques for constructing the learning filter. We conduct tracking experiments using a two-degree-of-freedom microelectromechanical system (MEMS) nanopositioner at frame rates ranging from 5 to 20 frames per second. The results reveal that the algorithm converges rapidly and the iterative learning controller significantly reduces both the transient and steady-state tracking errors. We acquire and report a series of high-resolution time-lapsed video-rate AFM images with the rosette pattern.
7 November 2023 in IEEE Transactions on Control Systems Technology
In this article, we propose a new approach to address the control problem for negative imaginary (NI) systems by using hybrid integrator-gain systems (HIGSs). We investigate the single HIGS of its original form and its two variations, including a multi-HIGS and the serial cascade of two HIGSs. A single HIGS is shown to be a nonlinear NI system and so is the multi-HIGS and the cascade of two HIGSs. We show that these three types of HIGSs can be used as controllers to asymptotically stabilize linear NI systems. The results of this article are then illustrated in a real-world experiment where a 2-DOF microelectromechanical system (MEMS) nanopositioner is stabilized by a multi-HIGS.
13 December 2018 in IEEE Transactions on Control Systems Technology
We demonstrate the application of the internal model principle in tracking a sequential cycloid trajectory to achieve video-rate atomic force microscope (AFM) imaging. To generate a sequential cycloid pattern, one axis of the nanopositioner traces a sinusoidal signal superimposed on a slow triangular wave. Discontinuities at turning points induce large peaks in the steady-state tracking error. To address this issue, a smooth trajectory is designed to reduce the magnitude of error by 60 nm compared with the triangular wave. This trajectory reduces the magnitude of error 10 times. The tracking controller includes the dynamics of the harmonic waveforms and the ramp signal as well as higher order harmonics of the scanning frequency, and an integrator to cope with the system nonlinearities at low frequencies. We perform experiments on a two degree of freedom microelectromechanical system nanopositioner at various scanning frequencies ranging from 500 to 2580 Hz within a scan area of 5 μm × 10 μm. The root-mean-square value of tracking error remains below 6.1 nm with a pitch size of 44.2 nm. We acquire time-lapse AFM images in contact mode at scan rates as high as 20 frames per second.
1 July 2019 in Review of Scientific Instruments
We present an analysis and a systematic design methodology for a novel nonraster scan method based on a rosette pattern and demonstrate its application in video-rate atomic force microscopy. This pattern is traced when the lateral axes of a parallel kinematic scanner are commanded to follow a combination of two sinusoids with identical amplitudes and different frequencies. We design an internal-model-based controller to enhance the tracking performance of this pattern and implement the scheme on a microelectromechanical system scanner. The results reveal high-precision tracking of the rosette pattern in order to acquire time-lapsed atomic force microscope images at the rate of 10 frames/s.
26 May 2021 in IEEE Transactions on Control Systems Technology
We report a procedure to design fixed-structure strictly negative imaginary (SNI) controllers for collocated, highly resonant systems based on frequency response data. We formulate the problem in a two-input two-output (TITO) framework that includes robustness and stability constraints. The controller synthesis is cast as a convex optimization problem using convex approximation techniques. The measured frequency response of a two-degree-of-freedom (2-DOF) microelectromechanical system (MEMS) nanopositioner is used to compute the frequency response of the controller by minimizing the difference between the actual and desired closed-loop responses in an H₂ sense. By including the negative imaginary (NI) stability criterion as a constraint in the optimization algorithm, closed-loop stability is guaranteed. Performance of the synthesized controllers is verified in time and frequency domains through closed-loop experiments with the MEMS nanopositioner.
31 July 2020 in Journal of Microelectromechanical Systems
This manuscript presents a novel microcantilever with an embedded piezoelectric sensor-actuator pair for dynamic atomic force microscopy (AFM). The transducer pair is constructed from a two-layered AlN stack. Stacking the piezoelectric transducers in this manner leads to a minimal feedthrough from actuation to sense electrode, granting a high dynamic range frequency response for dynamic mode AFM. The cantilever's design allows for dual mode operation at 1st and 2nd resonance modes. High resolution tapping mode imaging results are reported, while the cantilever is operated at these modes. A feedback control loop is used to modify quality factor of the 1st mode of the cantilever, using a positive position feedback (PPF) controller. A faster response time is achieved by reducing the Q-factor, enabling the cantilever to track the topography at a higher scan rate. Results of bimodal AFM imaging are reported, using amplitude changes of the 1st mode for surface topography, while material properties are encoded in phase changes of the 2nd mode.