Purpose: The study aimed to evaluate the effect of different chemical solutions (ET, 95% ethanol, and ES, experimental solution of amyl acetate, acetone, and 95% ethanol) on the removal of epoxy-based sealer residues (AH, AH Plus Jet, or AD, Adseal) from the adhesive interface between root dentin and universal adhesive in post space third, after 6 months control. Methods: Eighty bovine roots were prepared and randomly divided according to the sealer and cleaning solution: AH Plus Jet + 95% ethanol (AH+ET), Adseal + 95% ethanol (AD+ET), AH Plus Jet + experimental solution (AH+ES), Adseal + experimental solution (AD+ES). Scanning electron microscopy was used to assess the incidence of residue in the post space, and the data obtained were subjected to Kruskal-Wallis/Dunn tests (α=0.05). Bond strength was evaluated in push-out tests, and the data were subjected to ANOVA/Tukey analysis. The adhesive failure pattern was assessed using stereomicroscopy, and the data have been evaluated through incidence frequency. Results: AH+ES and AD+ES showed lower residues incidence and higher bond strength values (p<0.05). Type 4 and 3 failures were observed in the cervical and middle thirds in the groups AH+ET, AD+ET, and AH+ES, AD+ES, respectively. Conclusion: The experimental solution positively influenced the bond strength of the post space.
This study evaluated the influence of different translucent resins (Z350 and Opallis) for customizing fiber posts and light-curing the cementation system using different LED equipment (V, Valo or R, Radii-Cal) on the bond strength and adhesive failure pattern at 24 h and 6 months. Eighty roots were prepared and divided into 4 groups (n=20): ZV (Z350 resin and LED Valo), ZR (Z350 resin and LED Radii-Cal), OV (Opallis resin and LED Valo), OR (Opallis resin and LED Radii-Cal). After post space preparation, the fiber post was customized and cemented with self-adhesive cement and light-curing using V or R LED equipment. Bond strength values were submitted to 2-way ANOVA test. ZV and ZR showed higher bond strength values than the other groups at 6 months of evaluation (p<0.05). The Z350 resin has a favorable influence on the bond strength of self-adhesive cement to root dentin, regardless of the LED polymerization equipment used.