6 November 2025 in IEEE Sensors Journal
The conventional high-precision single-slope analog to digital converter (SS ADC) integrated with time-todigital converters (TDCs) requires the introduction of precise delay lines and multiphase high-frequency clocks, leading to increased chip area and power consumption that degrade the performance of highly compact CMOS image sensors (CISs). This article presents a new SS ADC incorporating a level encoding TDC. By replacing clock-edge-based time tracking with logic-level encoding, the TDc’s clock requirement is reduced from $2^{n}$ to n. This innovation mitigates clock jitter effects and lowers power consumption. Moreover, the reduction in the number of clock signals simplifies the layout routing, which is a critical factor for highly compact column-level readout in such CISs. The proposed method performs a 12-bit coarse conversion using the SS ADC and a 2-bit fine conversion using the TDC. The SS ADC is designed in the 55 nm 1P4M CMOS process and implemented in an 8192 (H) × 8192 (V) CIS chip successfully. Simulation and test results show that the conversion time is $10.2~ \mu{\mathrm {s}}$ , power consumption is $73.1~ \mu{\mathrm {W}}$ , differential non-linearity (DNL) is +0.9/.0.8 LSB, integral nonlinearity (INL) is +1.2/.1.5 LSB, and the figure of merit (FoM) is 83.8 fJ/step, demonstrating the potential applications in ultrahigh-resolution, smallfeature- size CISs.