Cloud-based Intelligent Connected Vehicle (CICV) provide a new solution for realising autonomous driving. The openness of the wireless communication network between the vehicle and the cloud makes it vulnerable to cyber-attacks, and cyber-attacks intruding into the vehicle system tamper with or interrupt the original control signals, which poses a serious threat to the security of the vehicle's control. In order to avoid the degradation of trajectory tracking accuracy and driving stability of CICVs under hybrid cyber-attacks, this paper proposes an output feedback resilient control method. Firstly, the energy-constrained hybrid cyber-attack model and the error-constrained vehicle trajectory tracking control model are established, and the trajectory tracking closed-loop control system of CICV is constructed by combining the \(H\infty\) output feedback controller with the parameters to be determined. Secondly, the closed-loop trajectory tracking control system is analysed for stability based on the Lyapunov stability theory, and a quantitative stability evaluation index is proposed. Then, the linear matrix inequality (LMI) constraints for solving the \(H\infty\) output feedback controller are derived based on the results of the system stability analysis. Finally, the simulation is performed under typical conditions, and the results show that the designed controller can effectively maintain the stability of the vehicle and reduce the vehicle trajectory tracking error under the hybrid cyber-attacks.
30 January 2026 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
With the rapid development of electronic control and intelligent driving, vehicle chassis systems are shifting from mechanical structures to X-by-wire architectures. X-by-wire chassis reduce vehicle mass through lightweight design and offer excellent control precision, fast dynamic response, and strong scalability, which are crucial for intelligent connected vehicles. This review systematically summarizes the research progress of key technologies in X-by-wire chassis, with a focus on the control strategies of three core systems: steer-by-wire, brake-by-wire, and suspension-by-wire, as well as cutting-edge achievements in integrated chassis control. At the subsystem level, issues such as high-precision tracking control, robust fault-tolerant control and its deep integration with autonomous driving are discussed in depth. At the vehicle level, multidimensional cooperative control methods aimed at enhancing vehicle stability are thoroughly elaborated, encompassing lateral-longitudinal, lateral-vertical, longitudinal-vertical, and lateral-longitudinal-vertical cooperative control strategies. Finally, future challenges and development trends of X-by-wire chassis are outlined to provide guidance for further research in related fields.
1 December 2025 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
The Perception–Decision–Control (PDC) pipeline forms the core architecture enabling environmental perception, path planning, and trajectory execution in Connected and Autonomous Vehicles (CAVs). Uncertainty, as a key factor limiting system reliability and safety, permeates all stages of this pipeline, continuously generation, evolution, propagation, and amplification along the pipeline. This paper focuses on Link-Level Uncertainty management and systematically reviews modeling and mitigation strategies for uncertainty in the PDC pipeline. First, this paper distinguishes between externally induced and internally modeled perception uncertainties. Then, this paper analyzes the evolution of upstream uncertainty within the decision-making module, highlighting modal conflicts and policy ambiguity in trajectory reasoning and intent inference. Subsequently, this paper investigates the downstream propagation of decision uncertainty into the control stage, leading to distorted execution signals and reduced stability. Finally, this paper summarizes mainstream mitigation strategies including perception confidence modeling, robust decision optimization, and fault-tolerant control execution. In contrast to traditional module-specific approaches, future research should emphasize system-level modeling of chain-wise uncertainty evolution, develop cross-layer collaborative representation and optimization mechanisms, and construct end-to-end risk-aware frameworks to ensure safe and robust CAV operation in complex, dynamic environments.
12 December 2025 in IEEE Internet of Things Journal
A cloud-based intelligent connected vehicle (CICV) provides new approaches to realizing autonomous driving, and the relatively open wireless communication network of the vehicle cloud makes it vulnerable to cyberattacks. The cyberattacks that penetrate the vehicle system tamper with or interrupt the existing control signals, potentially leaving the vehicle system’s actuators in an unsafe operating region for an extended period of time, thereby increasing the risk of actuator fault. For avoiding the degradation of path-tracking accuracy and driving stability of CICVs under the coexistence of denial-of-service (DoS) attacks and steering system actuator motor fault, this article proposes a robust security control method based on time-lag state observation under the dynamic event triggering (DET) at the network layer. First, a closed-loop control system including nonuniform triggering period delay, DoS attack delay, steering system fault, and external perturbation under DET policy of the vehicle cloud wireless communication network is established. Second, the sideslip angle before the delay is estimated based on the reduced-order Kalman filtering method, and a robust observer is further constructed to observe the system state and steering system faults after the delay. Third, an observer-based dynamic output feedback robust safety controller (RSC) is designed with the path-tracking accuracy and stability of the vehicle as the control objectives. Then, an electromechanical braking (EMB) clamping force distribution controller was proposed to execute the additional yawing moment calculated by the above controller. Finally, simulations and HiL tests were performed under typical operating conditions for validation. The results indicate that the proposed DET scheme reduces the communication load by 23.5% compared with the time-triggered and static strategies while maintaining comparable control performance. Under DoS attacks, the proposed safety controller decreases the average lateral displacement error and heading angle error by 171.2% and 158.7%, respectively, relative to the conventional model predictive control (MPC).