This paper presents a constrained robust output feedback $\mathrm{{H}}\infty /\mathrm{{H}}_{2}$ control-based coordinated delay controller (ROHD) to deal with the controller area network (CAN) induced asynchronous delays which exist in the mode transition process (MTP) of a dual motor plug-in hybrid electric vehicle (DM-PHEV). Due to the multiple actuators of DM-PHEV and the limitation of network transmission rate, the control of MTP from electric driving mode (EM) to hybrid driving mode (HM) based on CAN bus inevitably induces random asynchronous delays. Firstly, the problem of MTP with CAN-induced delay is formulated and a mathematical model of MTP with asynchronous delays is built. In order to deal with the model uncertainty and the interference introduced by the measurement signals, ROHD controller is designed to achieve a fast, smooth and stable MTP in the presence of CAN-induced delays. Simulation and hardware-in-the-loop (HiL) test demonstrate that the torque demand and ride comfort of MTP with network-induced delays controlled by proposed controllers are better than those controlled by traditional robust controller.
9 January 2023 in IEEE Transactions on Transportation Electrification
A dual motor plug-in hybrid electric vehicle (DM-PHEVs) can achieve higher power and better fuel economy through Mode Transition Process (MTP) from pure electric to hybrid driving modes. In a DM-PHEV, the MTP is more complex, with more components to be managed. As well as being a combination of a discrete stage transition and a system with continuous state evolution, the several actuators exhibit significant discontinuous dynamics and different characteristics from each other, particularly mechanical hysteresis. This makes the design of a coordinated controller challenging. In this paper, a two-layer coordinated control strategy is proposed. The upper layer is based on a stage-dependent piecewise-affine (PWA) model which is used to develop a PWA-static output feedback H ∞ strategy (PWA-SOF). The lower layer is based on a simplified actuator lag model, and a H ∞ design technique is used to develop a robust torque controller that reduces the effect of mechanical hysteresis. The resulting strategy is described as a piecewise-affine modified static output feedback (PW-MSOF) algorithm. (While the individual elements are not novel contributions to control theory, the combination and application to this problem is.) Performance indices are defined and hardware-in-the-loop (HiL) test shows that the new controller can effectively suppress the vehicle jerk without adversely affecting other aspects of system behaviour.
10 April 2023 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
In this paper, an event-triggered [ ] control strategy is proposed for a novel quasi-zero stiffness semi-active air suspension (QZS-AS) system. The QZS-AS system consists of a quasi-zero isolator and magnetorheological dampers. The quasi-zero stiffness structure is composed of an air spring and a pneumatic actuator-cylinder. Compared with normal air suspension system, QZS-AS can achieve much lower natural frequency and better vibration isolation performance. In order to further enhance the vibration isolation performance of the QZS-AS system, semi-active robust control for nonlinear QZS-AS system is performed by adjusting the current of the magnetorheological damper. An event-triggered damping controller is introduced in the QZS-AS system to save the communication resources. Model-in-the-loop test and hardware-in-the-loop (HiL) test are conducted to verify the performance of proposed strategy. It is demonstrated that the event-triggered [ ] control is able to provide a similar performance as traditional time-triggered [ ] control while saving about 50% of the communication resources.
1 December 2025 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
The Perception–Decision–Control (PDC) pipeline forms the core architecture enabling environmental perception, path planning, and trajectory execution in Connected and Autonomous Vehicles (CAVs). Uncertainty, as a key factor limiting system reliability and safety, permeates all stages of this pipeline, continuously generation, evolution, propagation, and amplification along the pipeline. This paper focuses on Link-Level Uncertainty management and systematically reviews modeling and mitigation strategies for uncertainty in the PDC pipeline. First, this paper distinguishes between externally induced and internally modeled perception uncertainties. Then, this paper analyzes the evolution of upstream uncertainty within the decision-making module, highlighting modal conflicts and policy ambiguity in trajectory reasoning and intent inference. Subsequently, this paper investigates the downstream propagation of decision uncertainty into the control stage, leading to distorted execution signals and reduced stability. Finally, this paper summarizes mainstream mitigation strategies including perception confidence modeling, robust decision optimization, and fault-tolerant control execution. In contrast to traditional module-specific approaches, future research should emphasize system-level modeling of chain-wise uncertainty evolution, develop cross-layer collaborative representation and optimization mechanisms, and construct end-to-end risk-aware frameworks to ensure safe and robust CAV operation in complex, dynamic environments.
9 May 2025 in IEEE Transactions on Transportation Electrification
Network-induced delays can adversely affect mode transition quality in hybrid powertrains. Published literature has assumed that the transmission of signals is instantaneous and solved the performance deterioration of mode transition process (MTP) caused by actuator dynamic response hysteresis. This article develops this further by considering the coupling impact of actuator response hysteresis and network-induced delays on MTP of a dual-motor hybrid powertrain and designs a comprehensive coordinated control strategy to enhance mode transition quality. First, the distribution characteristics of network delays within the system are analyzed through a consideration of the fundamental architecture of the mode-transition networked control system. Second, the influence of network-induced delays on the stability and dynamic performance of mode-transition closed-loop control systems with actuator response hysteresis is examined and a model for the MTP with actuator response hysteresis is created that considers asynchronous network-induced delays. A coordinated control strategy is then designed to improve the performance of MTP. HiL testing indicates that the proposed control strategy can reduce vehicle jerk by 58% in the presence of asynchronous random network-induced delays, while also reducing the relative torque fluctuation to 0.4.