Purpose: To develop a previously reported, electrocardiogram (ECG)‐gated, motion‐resolved 5D compressed sensing whole‐heart sparse MRI methodology into an automated, optimized, and fully self‐gated free‐running framework in which external gating or triggering devices are no longer needed.Methods: Cardiac and respiratory self‐gating signals were extracted from raw image data acquired in 12 healthy adult volunteers with a non‐ECG‐triggered 3D radial golden‐angle 1.5 T balanced SSFP sequence. To extract cardiac self‐gating signals, central k‐space coefficient signal analysis (k0 modulation), as well as independent and principal component analyses were performed on selected k‐space profiles. The procedure yielding triggers with the smallest deviation from those of the reference ECG was selected for the automated protocol. Thus, optimized cardiac and respiratory self‐gating signals were used for binning in a compressed sensing reconstruction pipeline. Coronary vessel length and sharpness of the resultant 5D images were compared with image reconstructions obtained with ECG‐gating.Results: Principal component analysis–derived cardiac self‐gating triggers yielded a smaller deviation () from the reference ECG counterparts than k0 modulation () or independent component analysis (). Cardiac and respiratory motion‐resolved 5D images were successfully reconstructed with the automated and fully self‐gated approach. No significant difference was found for coronary vessel length and sharpness between images reconstructed with the fully self‐gated and the ECG‐gated approach (all ).Conclusion: Motion‐resolved 5D compressed sensing whole‐heart sparse MRI has successfully been developed into an automated, optimized, and fully self‐gated free‐running framework in which external gating, triggering devices, or navigators are no longer mandatory. The resultant coronary MRA image quality was equivalent to that obtained with conventional ECG‐gating.
1 December 2020 in Radiology: Cardiothoracic Imaging
A free-running fully self-gated five-dimensional flow MRI framework was introduced and validated in vitro and in vivo; results demonstrated that this technique can consistently and reliably capture... PurposeTo implement, validate, and apply a self-gated free-running whole-heart five-dimensional (5D) flow MRI framework to evaluate respiration-driven effects on three-dimensional (3D) hemodynamics...
Purpose: In this work, we integrated the pilot tone (PT) navigation system into a reconstruction framework for respiratory and cardiac motion‐resolved 5D flow. We tested the hypotheses that PT would provide equivalent respiratory curves, cardiac triggers, and corresponding flow measurements to a previously established self‐gating (SG) technique while being independent from changes to the acquisition parameters.Methods: Fifteen volunteers and 9 patients were scanned with a free‐running 5D flow sequence, with PT integrated. Respiratory curves and cardiac triggers from PT and SG were compared across all subjects. Flow measurements from 5D flow reconstructions using both PT and SG were compared to each other and to a reference electrocardiogram‐gated and respiratory triggered 4D flow acquisition. Radial trajectories with variable readouts per interleave were also tested in 1 subject to compare cardiac trigger quality between PT and SG.Results: The correlation between PT and SG respiratory curves were 0.95 ± 0.06 for volunteers and 0.95 ± 0.04 for patients. Heartbeat duration measurements in volunteers and patients showed a bias to electrocardiogram measurements of, respectively, 0.16 ± 64.94 ms and 0.01 ± 39.29 ms for PT versus electrocardiogram and of 0.24 ± 63.68 ms and 0.09 ± 32.79 ms for SG versus electrocardiogram. No significant differences were reported for the flow measurements between 5D flow PT and from 5D flow SG. A decrease in the cardiac triggering quality of SG was observed for increasing readouts per interleave, whereas PT quality remained constant.Conclusion: PT has been successfully integrated in 5D flow MRI and has shown equivalent results to the previously described 5D flow SG technique, while being completely acquisition‐independent.
Purpose: To implement, optimize, and test fast interrupted steady‐state (FISS) for natively fat‐suppressed free‐running 5D whole‐heart MRI at 1.5 tesla (T) and 3T.Methods: FISS was implemented for fully self‐gated free‐running cardiac‐ and respiratory‐motion‐resolved radial imaging of the heart at 1.5T and 3T. Numerical simulations and phantom scans were performed to compare fat suppression characteristics and to determine parameter ranges (number of readouts [NR] per FISS module and TR) for effective fat suppression. Subsequently, free‐running FISS data were collected in 10 healthy volunteers and images were reconstructed with compressed sensing. All acquisitions were compared with a continuous balanced steady‐state free precession version of the same sequence, and both fat suppression and scan times were analyzed.Results: Simulations demonstrate a variable width and location of suppression bands in FISS that were dependent on TR and NR. For a fat suppression bandwidth of 100 Hz and NR ≤ 8, simulations demonstrated that a TR between 2.2 ms and 3.0 ms is required at 1.5T, whereas a range of 3.0 ms to 3.5 ms applies at 3T. Fat signal increases with NR. These findings were corroborated in phantom experiments. In volunteers, fat SNR was significantly decreased using FISS compared with balanced steady‐state free precession (P < 0.05) at both field strengths. After protocol optimization, high‐resolution (1.1 mm3) 5D whole‐heart free‐running FISS can be performed with effective fat suppression in under 8 min at 1.5T and 3T at a modest scan time increase compared to balanced steady‐state free precession.Conclusion: An optimal FISS parameter range was determined enabling natively fat‐suppressed 5D whole‐heart free‐running MRI with a single continuous scan at 1.5T and 3T, demonstrating potential for cardiac imaging and noncontrast angiography.