1 March 2017 in Journal of Environmental Management
25 November 2015 in Waste Management & Research: The Journal for a Sustainable Circular Economy
The mechanism and capacity of adsorption of cadmium (Cd) on orange peel (OP)-derived biochar at various pyrolysis temperatures (400, 500, 600, 700 and 800°C) and heating times (2 and 6 h) were investigated. Biochar was characterized using proximate analysis, point of zero charge (PZC) analysis, Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy and X-ray diffraction. Equilibrium and kinetic experiments of Cd adsorption on biochar were performed. The results indicated that the pH value at PZC of biochar approached 9.5. Equilibrium can be reached rapidly (within 1 min) in kinetic experiments and a removal rate of 80.6–96.9% can be generated. The results fitted the pseudo-second-order model closely. The adsorption capacity was estimated using the Langmuir model. The adsorption capacity of Cd on biochar was independent of the pyrolysis temperature and heating time ( p>0.01). The maximum adsorption capacity of Cd was 114.69 (mg g−1). The adsorption of Cd on biochar was regarded as chemisorption. The primary adsorption mechanisms were regarded as Cπ–cation interactions and surface precipitation. Cadmium can react with calcite to form the precipitation of (Ca,Cd)CO3 on the surface of biochar. The OP-derived biochar can be considered a favourable alternative and a new green adsorbent for removing Cd2+ ions from an aqueous solution.
1 June 2017 in Chemical Engineering Communications
This study investigated the phenomenon and mechanism of adsorption of methylene green 5 (MG5) on three pristine biosorbents: golden shower pod (GS), coconut shell (CC), and orange peel (OP). The results showed that the biosorbents possessed low specific surface areas, but abundant functional groups. Adsorption was strongly affected by the solution’s pH and ionic strength. As revealed in the kinetic study, equilibrium was rapidly established, requiring low activation energies; a removal rate of 30%–87% was achieved within 1 min. The maximum Langmuir adsorption capacities at 30°C exhibited the following order: GS (106 mg/g) > OP (92 mg/g) > CC (59 mg/g). Thermodynamic experiments suggested that the adsorption occurred spontaneously (−ΔG°) and exothermically (−ΔH°). The primary adsorption mechanisms involved electrostatic attraction, hydrogen bonding formations, and n-π interaction. Thermogravimetric analysis (TGA) revealed that three biopolymer components (i.e., hemicellulose, cellulose, and lignin) played controlling roles in the adsorption process. Thus, these three agricultural residues can be considered potential low-cost adsorbents for efficient dye adsorption applications.
1 October 2012 in Journal of Hazardous Materials
27 January 2017 in Adsorption Science & Technology
Activated carbons (ACs) were synthesized from golden shower (GS) through chemical activation. Two synthesis processes were used: one-stage and two-stage processes. In the one-stage process, GS that was impregnated with K2CO3 was directly pyrolyzed (GSAC), and the two-stage process consisted of (1) pyrolytic or hydrolytic carbonization to produce biochar or hydrochar and (2) subsequent chemical activation was defined as GSBAC and GSHAC, respectively. The activated carbon’s characteristics—thermal stability and textural, physicochemical, structural, and crystal properties—were thoroughly investigated. Results demonstrated that the characteristics of activated carbons strongly depend on the method used for their synthesis. The Brunauer–Emmett–Teller surface area followed the order GSAC (1413 m2/g) > GSHAC (1238 m2/g) > GSBAC (812 m2/g). The existence of acidic groups was determined through Fourier transform infrared spectroscopy and Boehm titration. The excellent adsorptive capacities of the activated carbons were confirmed from the iodine number (1568–2695 mg/g) and methylene number (143–233 mg/g).
5 May 2017 in Korean Journal of Chemical Engineering