Plasmonic photodetectors are attracting the attention of the photonics community. Plasmonics is attractive because metallic structures have the ability to confine light by coupling an electromagnetic wave to charged carrier oscillations at a surface of the metal. The wavelength of such oscillations can be much smaller than the corresponding light wavelength in vacuum. This enables the light-matter interaction on a deep subwavelength scale, which in turn allows for more compact and potentially higher speed devices. In this review, we discuss different types of photodetectors and ways in which plasmonics can be applied to them. We elucidate several plasmonic photodetector concepts/schemes and discuss the main physical principles behind their operation. Finally, we reflect on the characteristics of an "ideal" photodetector and propose a device that might be the perfect plasmonic detector.
We investigate the stress evolution of 400 µm-thick freestanding GaN crystals grown from Si substrates by hydride vapour phase epitaxy (HVPE) and the in situ removal of Si substrates. The stress generated in growing GaN can be tuned by varying the thickness of the MOCVD AlGaN/AlN buffer layers. Micro Raman analysis shows the presence of slight tensile stress in the freestanding GaN crystals and no stress accumulation in HVPE GaN layers during the growth. Additionally, it is demonstrated that the residual tensile stress in HVPE GaN is caused only by elastic stress arising from the crystal quality difference between Ga- and N-face GaN. TEM analysis revealed that the dislocations in freestanding GaN crystals have high inclination angles that are attributed to the stress relaxation of the crystals. We believe that the understanding and characterization on the structural properties of the freestanding GaN crystals will help us to use these crystals for high-performance opto-electronic devices.
We demonstrate a 400 μm-thick GaN layer on 4 inch (0001) Al2O3 substrates through GaN nanodot formation as a seed for stress relaxation layers, which were formed by an in situ special surface treatment using HVPE. The size and density of the GaN nanodots determined the thickness of the stress relaxation layers and the structural properties of thick GaN. The 400 μm-thick GaN layer exhibits a smooth surface and high crystal quality with FWHM of 104 arcsec and 163 arcsec in the (002) and (102) X-ray rocking curves, respectively. The dislocation density estimated via micro-PL measurements was 2 × 106 cm−2. This can provide an efficient and simple way to fabricate thick GaN layers on an Al2O3 substrate without ex situ buffer layer formation or additional complicated processes.