1 February 2024 in Physics of Fluids
Due to the complex structure of a double-suction pump's suction chamber, the flow in the pump's cavity is often ignored in numerical simulations because of difficulties in structured hexahedral meshing. However, the wear ring clearance interlinking the pump chamber leads the fluid at the impeller inlet directly to the impeller area. This significantly impacts the pump's internal flow field, so the influence of the clearance on the internal flow of a double-suction pump cannot be ignored. This paper develops four three-dimensional double-suction pump models with different wear ring clearances to investigate their influence on pump performance, and structured hexahedral meshes were used for all the computational domains. The clearances varied from 0.2 to 0.5 mm in 0.1 mm increments. The influences of the clearance on the energy loss, external characteristics, and internal flow field distribution of the pump were simulated via a verified computational fluid dynamics method. The results show that the wear ring leakage decreases with the flow rate and increases with wear ring clearance. The increase in backflow leads to an internal flow disorder inside the impeller, resulting in a decreased head and efficiency. Energy loss is mainly caused by increasing the turbulence entropy production with an increasing wear ring clearance. Also, the low-pressure region in the pump cavity expands to the volute with increasing clearance, and the impeller outlet pressure decreases. This study's research on wear ring clearance provides a reference for the design and application of double-suction centrifugal pumps.
1 August 2024 in Physics of Fluids
Pump as turbine (PAT) is widely used in micro hydropower stations and chemical industries as an economical energy recovery device. The special impeller with forward-curved blades can significantly improve the efficiency of PAT and expand its high-efficiency range due to the suitable blade profile, which is more appropriate for PAT's operation mode than the backward-curved blades. To study the influence of the forward blade on a double-suction centrifugal PAT performance, three forward-curved blade schemes with different blade angle conditions are compared with the original backward-curved blade scheme. The three forward-curved blade schemes have the highest efficiency when the inlet angles are 60°, 90°, and 120°, respectively, and the appropriate blade outlet angle. The results showed that the forward-curved blade is suitable for high-flow rate operating conditions in double-suction centrifugal PAT. The PAT with a forward-curved blade impeller has higher efficiency and a broader high-efficiency region than the backward-curved blade impeller. The double-suction centrifugal PAT's main energy loss comes from the impeller's turbulent loss. The forward-curved blade reduces the impeller's turbulence loss and improves the PAT's efficiency at large flow rates. The research in this paper provides a theoretical basis for the design and application of double-suction centrifugal PAT.
1 June 2024 in Physics of Fluids
As an economical energy recovery device, pump as turbine (PAT) is widely used in micro-hydropower stations and the chemical industry. The inlet and outlet pipelines connected to the double-suction pump are on the same horizontal line. As the pipeline layout is very convenient, in some chemical industries, the way of residual pressure energy utilization is increasing using the double-suction pump as a turbine. Based on numerical simulation, experimental verification, and entropy generation theory, the energy loss rule of each flow component in the pump mode and turbine mode under different flow rates is compared and analyzed. The results show that when the double-suction pump is used as a turbine, the flow rate at the best efficiency point (BEP) in the turbine mode shifts to a large flow rate by 30.89% and the BEP efficiency decreases by 1.30%. In the pump mode and turbine mode, the main energy loss component is the impeller, and the turbulent entropy generation power and the wall entropy generation power are the main sources of energy loss. The energy loss in the suction chamber and impeller increases sharply, and the energy loss is primarily enhanced in the blade trailing edge and the tongue near due to the unsteady flow in the turbine mode. Due to the complex structure, the spiral suction chamber is not suitable for the flow direction of the fluid flow out of the impeller, and the flow state inside the impeller is negatively affected by the suction chamber in the turbine mode. This paper provides a theoretical basis for the design and application of double-suction centrifugal PAT.