15 December 2020 in IEEE Transactions on Industry Applications
Due to its low loss and high switching frequency, the silicon carbide metal oxide field effect transistors (SiC MOSFETs) are more suitable as switching devices in power inverter for electric vehicles (EVs). However, the power losses of power inverter would be dramatically increased with the rise of switching frequency, which would result in the limitation of using the high switching frequency performance of SiC MOSFET. In view of this case, this paper would systematically analyze the power losses distribution of power inverter and further optimize its efficiency under the high switching frequency. It is demonstrated that the power losses of power inverter are linearly increased with the rise of switching frequency, which is mainly caused by the switching losses of MOSFET chips increment. Based on this situation, an adaptive discontinuous pulse width modulation (ADPWM) is proposed to optimize the power inverter efficiency under the high switching frequency, which can effectively reduce the total power losses of power inverter and improve its efficiency compared with that of the conventional PWM strategies. Finally, the power losses and efficiency of power inverter with the proposed ADPWM strategy is verified by the experimental results.
6 February 2020 in IEEE Access
Space vector pulse width modulation (SVPWM) is used in motor control because of its high dynamic response and flexible control. Maximum torque per ampere (MTPA) strategy has become the most commonly used choice for internal permanent magnet synchronous motor (IPMSM). However, complicated coordinate transformations are required in the usual SVPWM algorithm and the performance of the MTPA algorithm can be affected by the parameters variation. This paper proposes a voltage vector directional control (VVDC) method based on the MTPA strategy. The inverse Park transformation is avoided in the proposed control scheme. And the proposed algorithm not only is briefer and clearer in the sector judgment process but also has lesser calculation during the duty cycle generation. In order to realize the MTPA strategy, two voltage feedback closed loops are designed to compensate for the d -axis and q -axis currents. A simple and effective multi-parameter identification method is also presented to solve the parameters variation problem. The effectiveness of the proposed method is verified by simulation and experiments.