Electrically induced patterning is a process for fabricating micro- or nano-structures where a voltage is applied between a conductive template and a polymer-coated substrate, sandwiching an air gap. In the structure-forming process, the polymer film is pulled upwards non-uniformly to the template under the influence of an electric field spatially modulated by protrusions and cavities of the template pattern, being deformed into a structure positive to the template pattern. This paper explores applicability of the electrically induced patterning process in duplicating an irregular structure with features of significantly varying size from a template onto the polymer, and shows that irregular structures, such as the one composed of features with a linewidth varying from 2 μm to 20 μm, as in our experiment and numerical simulation, can be formed on the polymer by a spatially fine-modulated electric field. A ratio of modified most unstable wavelength on the characteristic length and a mass parameter are proposed in terms of the major process variables to define the regimes of spatial modulation by the electric field, i.e. under-modulation, fine-modulation and over-modulation. In addition, an experiment is also performed to duplicate clusters of cylindrical pillars and square prisms sized from 5 μm to 40 μm by tuning the process into a regime of fine-modulation. The experimental results have shown an applicability of the ratio of the modified most unstable wavelength on the characteristic length and the mass parameter in characterizing this structuring method.
The grating is the displacement measurement standard, and the diffraction efficiency of the diffracted light of the grating mainly determines the accuracy of the displacement measurement system. In this work, through three-dimensional finite-difference time-domain (FDTD) method simulation, the diffraction efficiency of the ±1 st order diffracted light of the transmission diffraction grating under different macro complex groove types and micro surface roughness is studied, and the optimal groove type and surface roughness parameters were obtained. The research results provide a basis for the optimal design of grating manufacturing.
Electrohydrodynamic patterning of arbitrary patterns is achieved by optimizing the critical parameters (applied voltage and spacer height). The applied voltage has a great influence on the fidelity of L-shaped line structures with different sizes. The L-shaped line structures with high fidelity are obtained by using the moderate applied voltage. The spacer height has a great influence on the fidelity of square structures with different sizes. The square structures with high fidelity are obtained by using the low height spacer. The multi-field coupling transient finite element simulation demonstrates that the lack of polymer owing to the high height spacer leads to the formation of defects.