26 September 2019 in Physical Review X
The nitrogen-vacancy (NV) center in diamond exhibits spin-dependent fluorescence and long spin coherence times under ambient conditions, enabling applications in quantum information processing and sensing. NV centers near the surface can have strong interactions with external materials and spins, enabling new forms of nanoscale spectroscopy. However, NV spin coherence degrades within 100 nm of the surface, suggesting that diamond surfaces are plagued with ubiquitous defects. Prior work on characterizing near-surface noise has primarily relied on using NV centers themselves as probes; while this has the advantage of exquisite sensitivity, it provides only indirect information about the origin of the noise. Here we demonstrate that surface spectroscopy methods and single-spin measurements can be used as complementary diagnostics to understand sources of noise. We find that surface morphology is crucial for realizing reproducible chemical termination, and use this insight to achieve a highly ordered, oxygen-terminated surface with suppressed noise. We observe NV centers within 10 nm of the surface with coherence times extended by an order of magnitude.
25 July 2014 in Physical Review A
It has been shown in earlier works that the vertices of Platonic solids are good measurement choices for tests of Einstein-Podolsky-Rosen (EPR)-steering using isotropically entangled pairs of qubits. Such measurements are regularly spaced, and measurement diversity is a good feature for making EPR-steering inequalities easier to violate in the presence of experimental imperfections. However, such measurements are provably suboptimal. Here, we develop a method for devising optimal strategies for tests of EPR-steering, in the sense of being most robust to mixture and inefficiency (while still closing the detection loophole, of course), for a given number of measurement settings. We allow for arbitrary measurement directions, and arbitrary weightings of the outcomes in the EPR-steering inequality. This is a difficult optimization problem for large , so we also consider more practical ways of constructing near-optimal EPR-steering inequalities in this limit.
26 September 2014 in The Journal of Physical Chemistry C
13 July 2020 in Physical Review B
Synchrotron x-ray photoelectron spectroscopy was used to explore the relationship between the hydroxyl termination and band bending at the surface of bulk single crystals. All as-received surfaces were terminated with OH groups, with H/OH binding to surface atoms. Removal of this native OH termination produced a large upward shift in band bending of up to 1.0 eV, consistent with strong electron depletion and a semiconductor to insulator-like transition in the near-surface region. Simple surface treatments were used to control the size and stability of the band bending of as-received surfaces by modifying the nature of the OH termination. NaOH () treatment consistently produced upward (downward) shifts in band bending and a significant increase (decrease) in the thermal stability of the OH termination that was associated with an increase in the relative density of () species. Annealing in wet (at 600 °C) produced an extremely stable OH termination and the strongest downward shift in band bending. These effects, combined with the relatively slow dissociation of on bare surfaces, allowed the preparation of surfaces with significant variations in band bending that may prove useful in optimizing the properties of metal-semiconductor contacts and heterojunctions. A comparison of two methods used to determine the absolute band bending at semiconductor surfaces confirmed that bare surfaces are characterized by strong upward band bending (∼0.5 to 1.0 eV) and an electron depletion layer that can be completely removed by the hydroxylation of the surface.
19 August 2009 in Journal of Physics: Condensed Matter
A review of diamond-metal contacts is presented with reference to reported values of interfacial potential (Schottky) barriers and their dependence on macroscopic and microscopic properties of the diamond surface, the interface and the metal. No simple model can account for the overall spread of p-diamond barriers, although there are, for certain metals, correlations with metal electronegativity, interface chemistry and diamond surface preparation. Detailed studies are presented for a selected contact (Al-p-diamond) using real-time monitoring during metal growth from sub-nanometre to bulk films and subsequent in situ heating to 1000 °C. This contact, prepared in a clean vacuum environment on characterized single-crystal substrates, provides a case study for a combined in situ electrical and spectroscopic investigation using IV measurements for macroscopic diodes and real-time photoelectron spectroscopy for nanoscale metal films. Band bending during growth leads to a rectifying contact with a measured IV barrier height of 1.05 V and an ideality factor of 1.4. A transition from layered to clustered growth of the metal film is revealed in the real-time measurements and this is confirmed by AFM. For the annealed contact, a direct correlation is revealed by real-time photoemission between the onset of interfacial carbide formation and the change from a rectifying to an ohmic contact at 482 °C.
24 September 2007 in Applied Physics Letters
Real-time photoelectron spectroscopy and in situ electrical measurements have been applied to the formation of Al contacts on -type diamond. At , an initially uniform Al film induces band bending in the diamond consistent with the measured (current-voltage) barrier height of . The temperature-induced transition to an Ohmic contact has been monitored in real time revealing a direct correlation between the onset of surface bonding at and an abrupt change in surface band bending. The reaction temperature is lower than previously believed, and there is a second transition point at where the rates of change of both reaction and band bending increase sharply.