13 July 2020 in Physical Review B
Synchrotron x-ray photoelectron spectroscopy was used to explore the relationship between the hydroxyl termination and band bending at the surface of bulk single crystals. All as-received surfaces were terminated with OH groups, with H/OH binding to surface atoms. Removal of this native OH termination produced a large upward shift in band bending of up to 1.0 eV, consistent with strong electron depletion and a semiconductor to insulator-like transition in the near-surface region. Simple surface treatments were used to control the size and stability of the band bending of as-received surfaces by modifying the nature of the OH termination. NaOH () treatment consistently produced upward (downward) shifts in band bending and a significant increase (decrease) in the thermal stability of the OH termination that was associated with an increase in the relative density of () species. Annealing in wet (at 600 °C) produced an extremely stable OH termination and the strongest downward shift in band bending. These effects, combined with the relatively slow dissociation of on bare surfaces, allowed the preparation of surfaces with significant variations in band bending that may prove useful in optimizing the properties of metal-semiconductor contacts and heterojunctions. A comparison of two methods used to determine the absolute band bending at semiconductor surfaces confirmed that bare surfaces are characterized by strong upward band bending (∼0.5 to 1.0 eV) and an electron depletion layer that can be completely removed by the hydroxylation of the surface.
1 October 2019 in Journal of Applied Physics
Transparent Sb-doped epitaxial (101) thin films were grown via mist chemical vapor deposition, a nonvacuum solution-based technique that involves the gas-assisted transport of ultrasonically-generated aerosols from simple aqueous Sn and Sb precursors. The electrical properties (at 300 K) of the resulting films could be varied from insulating to semimetallic via Sb doping, with a minimum resistivity of , carrier concentrations up to , and a maximum mobility of , results similar to those achieved using molecular beam epitaxy and other more-sophisticated high vacuum techniques. Secondary ion mass spectrometry and Hall effect measurements revealed that 14% of Sb in the precursor solution incorporates into the films, with almost all the Sb atoms forming shallow substitutional donors on the Sn-site. The increase in the carrier concentration with Sb doping produced a Burstein-Moss shift of the optical gap of 0.49 eV, without significantly reducing the more than 90% transparency of the films in the visible region. X-ray photoemission spectroscopy ( ) showed an asymmetric core-level emission characterized by a carrier concentration-dependent peak splitting. This effect was modeled in terms of the creation of an intrinsic plasmon loss satellite from which a conductivity effective electron mass of was determined.
10 June 2019 in Applied Physics Letters
Oxidized iridium (IrOx) Schottky contacts (SCs) with excellent high temperature stability were fabricated on β-Ga2O3 single crystal substrates. These IrOx:β-Ga2O3 SCs were operated at temperatures from 24 to 350 °C with only a very small increase in reverse leakage current, while maintaining extremely high rectification ratios (at ±3 V) of more than 10 orders of magnitude at all temperatures, including 350 °C. This remarkable high temperature performance was due to their very high and thermally stable rectifying barriers that, after an initial heat-related improvement, were characterized by zero-bias effective barrier heights of 2.05 ± 0.02 eV and ideality factors of 1.05–1.10, which were almost unchanged by further repeated operation at 350 °C. The reverse leakage current density at 350 °C was only ∼2.3 × 10−9 A cm−2 (∼3.0 pA) at −3 V and ∼7.5 × 10−8 A cm−2 (∼100 pA) at −100 V. These IrOx:β-Ga2O3 SCs represent a significant improvement in high-temperature β-Ga2O3 SC performance, with considerable potential for the fabrication of high temperature β-Ga2O3 rectifying diodes, deep UV photodetectors, and metal-semiconductor field effect transistors.
29 July 2019 in Physical Chemistry Chemical Physics
A downward to upward surface band bending change can be induced by grafted 4-(trifluoromethyl)phenyl groups on SnO 2 .