21 March 2025 in IEEE Transactions on Aerospace and Electronic Systems
This paper addresses formation control of quadrotor swarms subject to external time-varying disturbances and actuator failures, while ensuring collision avoidance. Firstly, a complete dynamics model incorporating translational movement, rotation, motor, and actuator failures was developed for each quadrotor. Then, nominal controllers for the position and attitude subsystems are designed separately to achieve formation control under ideal conditions. A higher-order sliding mode (HOSM) observer is implemented to effectively estimate and compensate for external disturbances and actuator bias faults, thereby improving the stability of the system. Next, a potential energy function-based collision avoidance mechanism is implemented to ensure inter-quadrotor collision avoidance. Furthermore, a fault detection and fault-tolerant control(FTC) method is designed to estimate the lift coefficient of actuator partial failures online in real time by employing Newtons correction method, which ensures the safe and reliable flight of the system. The stability of the closed-loop system is analyzed using Lyapunov stability theory. Finally, numerical simulations and hardware-in-the-loop (HIL) experiment results are performed to validate the approach's effectiveness and performance in quadrotor swarm formation control.
25 July 2024 in IEEE Transactions on Automation Science and Engineering
This paper addresses the problem of formation control for a quadrotor swarm (QS) system with directed graph topology under external environmental disturbances and unreliable internal state acquisition. The proposed distributed robust control framework, based on a gemetric controller, incorporates $\mathcal{L}_1$ adaptive controllers and differentiator systems. First, the geometric formation controller is designed to implement the formation control of the nominal system. Then, $\mathcal{L}_1$ adaptive controllers are designed separately for each quadrotor’s position loop and attitude loop subsystems to address the effects of uncertainties such as external time-varying disturbances (matched and unmatched disturbances) and different mass variations of quadrotors. Furthermore, the differentiator system is devised to accurately estimate the higher-order derivatives of the non-directly-measurable velocity information and the virtual translation control signal, which enhances system accuracy while reducing computational complexity. The Lyapunov stability theory is employed to analyze the stability of the closed-loop system. Finally, the effectiveness and exceptional performance of this approach in QS formation control were validated through numerical simulation and experimental results. Note to Practitioners —The inspiration for this article comes from the issue of formation control in a cluster of quadrotor drones, which is also applicable to formation control in other types of drones. In this paper, a formation control algorithm based on $\mathcal{L}_1$ adaptive control strategy and arbitrary-order differentiation is designed. This algorithm can address not only the issue of time-varying wind disturbances frequently encountered during quadrotor drone flights but also the effects of unpredictable velocities and inconsistent masses of quadrotor drones. The disturbance rejection capability of this scheme enables quadrotor drones to be applied more safely and reliably in complex environments for search and rescue missions and surveillance tasks. Eliminating the need for linear velocity measurements reduces sensor costs and enhances system reliability and stability. The proposed formation control scheme allows the QS system to have different masses for each UAV, which can be applied to tasks such as collaboration logistics transportation, material delivery and crop spraying. Preliminary physical experiments have validated the feasibility of the proposed scheme, although it has not been applied in practical scenarios yet. In future research, we intend to equip each drone in the QS system with objects of different masses to achieve collaboration material transportation and delivery in complex environments.
5 September 2023 in Asian Journal of Control
13 August 2024 in IEEE Transactions on Intelligent Vehicles
In this paper, the problem of quadrotor swarm formation control with varying model parameters, unmeasurable linear velocities and external time-varying disturbances is addressed. The method leverages the advanced uncertainty and disturbance estimator (UDE) technology to design an outer loop controller that seamlessly coordinates translational motions, facilitating the achievement of the desired formation pattern with unparalleled precision. To enhance the overall performance of the translational dynamics, a higher-order differentiator is introduced, which estimates the unmeasurable linear velocity and the higher-order control input. Additionally, the inner-loop attitude controller is designed using the Lie algebraic space and the UDE technique. The Lyapunov stability theory is employed to conduct the stability analysis of the closed-loop system. Finally, the numerical simulation and experiment results demonstrate the effectiveness and exceptional performance of this novel approach.
6 August 2025 in IEEE Transactions on Industrial Electronics
Gesture recognition constitutes a core modality for human–robot interaction (HRI). Current studies primarily address short-distance scenarios, whereas long-distance outdoor scenarios remain significantly underexplored. The principal technical challenges arise from three key challenges: First, the predominant separated spatio-temporal processing approach in current network architectures and attention mechanisms. 1) introduces redundant structural complexity and computational demands, severely constraining unmanned aerial vehicle (UAV) platform implementation. 2) Inherently limits the model’s ability to learn weakly-correlated spatio-temporal relationships. 3) Additionally, existing HRI systems demonstrate inherent deficiencies in accurate hand localization and skeleton estimation under long-distance conditions. To address these issues, we propose a lightweight spatio-temporal skeleton (STS) attention transformer for long-distance gesture recognition in UAV control. First, we designed and implemented a lightweight STS Transformer to unify spatial-temporal feature processing while maintaining structural simplicity. Second, we developed an STS attention employing coupled-decoupled operators on skeleton sequences to extract weakly-correlated features. Subsequently, we developed a two-stage RGB+D framework for hand detection and skeleton estimation, achieving capability at extended ranges up to 5 m under UAV onboard camera view and 10 m in third-party camera view. Finally, extensive experiments on two datasets and real-world experiments were conducted to demonstrate the effectiveness of our network in skeleton-based gesture recognition, showing a clear advantage over the state-of-the-art (SOTA) methods.
22 May 2026 in IEEE Transactions on Industrial Electronics
This article investigates distributed formation tracking control for multiple quadrotor UAVs subject to switching topologies with external disturbances and mass uncertainties. We propose an adaptive finite-time disturbance observer combining time-varying bandwidth with fractional-power correction terms to outperform conventional linear observers. A Lyapunov-based event-triggered mechanism governs topology switching via formation energy metrics, guaranteeing minimum dwell time and finite switching frequency. Stability analysis characterizes convergence rates for both fixed and switching topologies through Lyapunov construction. Simulations comparing against four recent baselines demonstrate up to an 80% reduction in formation error, while hardware-in-the-loop (HIL) experiments validate the real-time implementability and robustness of the proposed framework under embedded implementation constraints.