6 July 2023 in IEEE Transactions on Industry Applications
In this paper, a comparative study of permanent-magnet vernier (PMV) motors and the interior permanent-magnet (IPM) motor for hybrid electric vehicles (HEVs) is presented. Four different topologies of PMV motors, including the conventional PMV motors and the developed U-shape PMV (U-PMV) motors with full-pitch (FP) and short-pitch (SP) windings, are comprehensively investigated and compared. The results show that higher torque and PM utilization can be achieved in the developed U-PMV motors due to the improved flux modulation effect. In addition, SP windings can facilitate PMV motors to achieve higher output torque/power, efficiency, and PM utilization when a high power factor is required. The improvement of the flux modulation effect in the developed U-PMV motors is explained using the simplified magnetic circuit, while the advantages of SP winding over FP winding at a high power factor level are illustrated using winding function theory. To evaluate the performances and potential of PMV motors for HEVs, both the conventional PMV and the developed U-PMV motors are optimized and compared with the IPM motor under fair conditions. The results show that PMV motors offer higher torque density, power density, and lower torque ripples, compared to the IPM motor. However, more PM consumption and higher cost of PMV motors are the disadvantages of PMV motors for automotive applications where cost constraints are sensitive.
30 August 2022 in IEEE Transactions on Industrial Electronics
This article investigates the stator shifting technique (SST) for permanent magnet Vernier (PMV) machines equipped with two-slot pitch winding (TSPW). By employing SST, TSPWs can be generated from the combination of two sets of fractional-slot concentrated windings, with various shift angles. The effects of various shift angles on armature magnetomotive force harmonic contents are explored. It shows that proper shift angles can be selected to preserve the working component while eliminating loss-producing harmonics. Besides, the implementation of various shift angles leads to uneven stator teeth structure, which affects field modulation. Therefore, the output torque capability, phase inductance, power factor, core losses, and fault-tolerance are affected by different shift angles. This article aims to exploit the full potential of TSPW-PMV machines by SST, considering the synthetic effects on harmonic reduction and field modulation. Through the exemplification of 24- slot, 19-rotor pole pair, and 5-armature pole pair PMV machines, it indicates SST is a more general and flexible design method that can provide new design opportunities and improve various performance metrics by introducing shift angle as an additional design variable. Finally, a prototype of the double-layer TSPW-PMV machine with optimal shift angle is fabricated for concept validations.
19 January 2021 in IEEE Access
This paper reveals the fundamental reason for the asymmetrical issue in magnetic-geared machines (MGMs) based on flux modulation theory. The analysis indicates that the magnetic circuits of three-phase windings in MGMs are inherently asymmetrical. This asymmetrical issue is even more severe in conventional consequent-pole MGMs (CP-MGMs) because of the more distorted magnetic field. Hence, to address the asymmetrical issue, a novel structure featuring enhanced harmonic elimination capability is proposed in this paper. Consequently, torque density can also be improved. In particular, the proposed CP-MGM employs modular structure and axially embedded permanent magnets (PMs) to achieve symmetrical back electromotive force (EMF) waveforms and improved torque capability, respectively. To further improve the electromagnetic performance of the proposed CP-MGM, the PM arc ratio and flux modulator width ratio are analytically designed, which provides a general design guideline for CP-MGMs. To illustrate the merits of the proposed CP-MGM, a few other MGMs are included for a fair comparison based on finite element analysis (FEA). Results show the proposed CP-MGM can achieve more symmetrical back EMF waveforms and lower torque ripple, as well as lower PM consumption and higher torque density, as compared with its MGM counterparts.
22 July 2022 in IEEE Transactions on Vehicular Technology
In this paper, the interior permanent-magnet vernier (PMV) machines and the conventional PMV machine are quantitatively compared regarding the requirements for electric automatic guided vehicles (AGV). The key feature of the interior PMV machines is to place the middle iron pole sandwiched by PMs in the slots between the salient rotor poles. As a result, three types of interior PMV machines with different PM arrangements, namely two V-type PMV (V-PMV) and one U-type PMV (U-PMV) machines, are developed. Due to the improved flux modulation effect, the V-PMV and U-PMV machines can respectively provide over 20% and 30% higher torque density than the conventional PMV counterpart, under a high power factor level of 0.86. The working principle is illustrated based on the field modulation theory. A comparative study among the conventional PMV and interior PMV machines is conducted in terms of electromagnetic performances and dynamic responses, after performing global optimization of design parameters. Finally, a prototype is manufactured and tested for experimental validations.
27 March 2023 in IEEE Transactions on Transportation Electrification
Magnetic-geared machine (MGM) has been widely investigated as the power split device for hybrid electric vehicles with the inherently high-integration of multi-mechanical ports. It is revealed that the magnetic circuits of armature winding in MGM are essentially asymmetrical for different phases under the magnetic field modulation effect. This inevitably results in unbalanced phase back electromotive force (EMF) waveforms, severe torque ripples, acoustic noise, and difficulty for precise control. To alleviate the asymmetry problem, a generic winding design model is presented for MGMs in this paper, which allows for consideration of all potential winding configurations. Firstly, a novel back EMF harmonic factor is proposed to account for both the harmonic content and asymmetric level in MGM. The genetic algorithm (GA) is further employed to optimize the winding in terms of minimizing the back EMF harmonic factor, armature magnetomotive force harmonic contents, and phase winding resistance. The proposed winding layout exhibits superior filtering capability for three-phase asymmetric magnetic field harmonics. As compared with the conventional integral-slot distributed winding, the MGM with the proposed winding exhibits improved back EMF waveform symmetry, suppressed torque ripple, and reduced core losses. Finally, an experimental prototype is manufactured to validate the effectiveness of asymmetric magnetic field suppression for MGMs. The results show the investigated winding design method is an effective solution to the asymmetric issue of MGMs, paving the way to research opportunities for further improvements.