Effective transparent barrier/encapsulation systems represent a key enabling technology for large‐area electronics. Securing stability to the environment is vital. Here, the effects of architectures, application processes, and water vapor transmission rates (WVTR) of transparent flexible ultra‐high permeation barrier films (UHPBF) applied to substrates with adhesive resins are unraveled for attaining long lifetime, and compared with polyethylene terephthalate and glass barriers. How strongly performance of barrier/adhesive systems depends on barrier orientation, adhesion, manipulation, defects, and storage procedures is quantified via calcium tests. Furthermore, it is found that introducing an additional adhesion‐promoting layer on the standard UHPBF stack reduces WVTRs by a factor of 5 compared to barriers without it. Finally, barriers are used for sealing and encapsulation of perovskite solar cells (PSCs) enabling the extraction of a relationship between WVTRs of barrier/adhesive systems and degradation rates (DR) of PSCs. DR fall exponentially when WVTRs decrease from 101 to 10−3 g m−2 d−1. Outside that range any gains or losses are mitigated by tailing of the sigmoid curve relating the two parameters. Results highlight important factors which will help those developing strategies relating to encapsulation, barrier, adhesive and sealant systems and stable optoelectronic devices on glass and flexible substrates.
We present a big leap in performance for indoor photovoltaics by developing flexible perovskite solar cells (PSCs) on ultra-thin flexible glass (FG). We manufactured roll-to-roll ITO-coated FG with excellent transmittance (> 80%) and sheet resistance (13 Ω/square ) and impressive bendability. Rather than resulting in planar structures which worked best for thick rigid glass-based cells, optimized PSCs on the ultrathin FG incorporate instead a mesoporous scaffold over thin SnO2 compact layers that significantly contributed to the achievement of breakthrough power conversion efficiencies (PCEs) of 20.6% (16.7 m W cm-2 power density), and 22.6% (35.0 m W cm-2) under 200 and 400 lx LED illumination respectively. These represent the highest reported for any existing flexible photovoltaic technology tested in indoors, surpassing by a huge 60-90% margin the prior best-performing flexible PSCs, as a result of significantly lower recombination currents and series resistances, higher fill factors and shunt resistances. Ultra-thin glass flexible PSCs can become the key enabling technology for the indoor electronics of the future, being lightweight, conformable and highly efficient.