Covert communication is crucial to preventing the warder's detection of wireless transmission. In general, small transmit power is required to satisfy the covertness requirement, which limits the system performance between the transceivers. To overcome the limitation, a multi-antenna relay is utilized and the coordinated direct and relay transmission (CDRT) is proposed in this paper. Since both the direct link and the relay link impact the system performance, an optimization problem is formulated to maximize the covert rate, where the beamforming vectors at the source and the relay are coupled. To address this problem, a semidefinite relaxation based line search method is proposed to obtain the globally optimal beamforming vectors, which balances the direct and the relay link to satisfy the covertness requirements and achieve the maximum covert rate simultaneously. Numerical results demonstrate the superiority and robustness of the proposed CDRT scheme compared with the systems without the direct or the relay link, especially when the warder-related links are highly correlated with the direct or the relay link. Besides, the CDRT scheme also outperforms the cooperative jammer assisted covert system even when the transmission power is high since the covertness requirements can be satisfied by joint beamforming in the CDRT scheme.
23 November 2022 in IEEE Transactions on Vehicular Technology
In this paper, the covert communication system with the assistance of an active intelligent reflecting surface (IRS) is investigated. Unlike the conventional passive IRS, which reflects signals without amplification, the active IRS can jointly amplify the amplitude and adjust the phase of the reflected signals to overcome the multiplicative fading effect. However, the additional noise introduced by the active IRS is not conducive to the signal demodulation at the destination and increases the detection probability by the warder. To overcome this problem and maximize the covert rate of the system, we jointly design the transmission power at the transmitter and the reflection coefficient of each reflection element at the active IRS. Since the optimization variables are coupled in the objective function and the constraints, an efficient semi-definite relaxation combined alternating optimization algorithm is proposed to solve the non-convex problem, where each subproblem is solved optimally. Numerical results demonstrate that the active IRS assisted system outperforms the passive one in term of the covert rate even when the number of reflection elements is large (such as ten thousand of elements), since the active IRS can amplify the incident signal to overcome the multiplicative fading effect.
7 December 2022 in IEEE Transactions on Vehicular Technology
Residual hardware impairments widely exist in transceivers and intelligent reflecting surface (IRS) in practical systems, which lead to serious signal distortion, causing performance loss and covert transmission challenging. In this paper, we study the robust transmission design for an IRS-aided covert communication system in the presence of transceiver and IRS hardware impairments. To maximize the signal-to-noise ratio at the legitimate receiver and satisfy the covertness requirement, the transmit power at the source and the reflection coefficients at the IRS are jointly optimized. Since the optimization variables are coupled, an alternating optimization algorithm is proposed to solve the optimization problem. Specifically, in each iteration, the analytical expression of the optimal transmit power is obtained, and the penalty successive convex approximation algorithm is adopted to obtain the optimal reflection coefficients. Numerical results show the performance loss caused by hardware impairments. Besides, by comparing the values of Kullback-Leibler divergence, results also illustrate that the proposed transmission scheme is more robust to the hardware impairments, as the nonrobust designed parameters can not satisfy the covert constraint.
13 September 2023 in IEEE Transactions on Wireless Communications
Short-packet communications are applied to various scenarios where transmission covertness and reliability are crucial due to the open wireless medium and finite blocklength. Nonetheless, transmission covertness and reliability present a dilemma and significantly limit the throughput for short-packet communications. Intelligent reflection surface (IRS) is utilized in this paper to address this issue by enabling channel reconstruction, thereby releasing the fundamental limit between transmission covertness, reliability, latency (blocklength), and throughput. Specifically, to reveal the benefits brought by IRS, the achievable throughput without IRS is derived first in terms of the transmission covertness requirement, reliability requirement, and blocklength. Subsequently, the achievable throughput with IRS is derived, which releases the fundamental limit among the above-mentioned performance metrics. Besides, considering the phase uncertainty at IRS and limited channel estimation overhead, the cases where the warder/IRS knows instantaneous/statistical channel state information (CSI) of warder-related/legitimate links are all discussed, elucidating the impacts of CSI availability on the throughput. Furthermore, numerical results verify the accuracy of analytical results and demonstrate the benefits provided by IRS. Especially, the achievable covertness and reliability performance can be enhanced while the minimum required blocklength can be reduced by introducing IRS, which is crucial for short-packet communications.
13 September 2023 in IEEE Transactions on Wireless Communications
Wireless short-packet communications pose challenges to the reliability and security of the transmission. Besides, the proactive warder compounds these challenges, who detects and interferes with the potential transmission. Thus, the tradeoff among reliability, covertness, latency (blocklength) and transmission rate is crucial, and efficient system design schemes are required for short-packet communications against the proactive warder. To address these issues, we investigate the reliable and covert performance of above systems. Specifically, detection error probabilities and their approximations are derived for cases where the warder knows the instantaneous/statistical channel state information. Besides, the decoding error probability is derived. The asymptotic relationship among the detection/decoding error probability, blocklength and transmission rate is established, revealing the non-trivial tradeoff between reliability and covertness performance. Furthermore, to maximize the effective throughput, an optimization framework is proposed under reliability and covertness constraints. Numerical results verify the tightness of the approximations and the feasibility of the optimization framework. Furthermore, it is shown that the proactive warder severely degrades the throughput compared to the passive one. And longer blocklength is always beneficial to improve the throughput for systems with optimized transmission rates, whereas the optimal blocklength is not necessarily the maximum one when transmission rates are fixed.
10 March 2025 in IEEE Transactions on Wireless Communications
The intelligent reflecting surface (IRS) has been widely applied in covert communications to hide the transmission behavior. However, the existing IRS relies on grid/battery power for its operation, which is unprocurable for practical covert communication applications. To address this issue, a novel multi-functional IRS (MF-IRS) is proposed for harvesting energy, signal reflecting, and amplifying simultaneously, where each element can flexibly switch between energy harvesting mode and passive/active reflection modes. To reveal the benefit of the MF-IRS for covert communications against multiple warders, the critical performance is analyzed, and effective design schemes are also provided. In particular, the detection error probabilities at warders are derived when the warders are non-collusive/collusive. In addition, the covert rate maximization problem is formulated by jointly optimizing the beamforming vector, element allocation matrices, and the reflection coefficient matrix. To solve this non-convex problem with highly coupled variables, an efficient successive convex approximation-based algorithm is proposed for the non-collusive scenario first and then extended to the collusive scenario. Simulation results demonstrate that the proposed MF-IRS always outperforms the self-sustainable passive/active IRSs, and it even outperforms the full-passive/active IRSs powered by grid/battery when the IRS is located near the signal source.