Multi-mode multi-band power amplifiers (PAs) are becoming increasingly important for wireless communication systems that need to cover multiple frequency bands. This paper presents a dual-mode dual-band Outphasing power amplifier (OPA). OPA and inverted OPA (IOPA) operation modes are enabled at two frequency bands leveraging on the periodicity of the non-commensurate transmission line combiner (NCTLC). It is illustrated that the different base and delta lengths required by the OPA and IOPA modes can be satisfied by the NCTLC at different frequency bands. To validate the proposed method, a dual-mode dual-band OPA operating over 0.89–0.93 GHz (OPA mode) and 1.89–1.96 GHz (IOPA mode) is designed and fabricated. Measurement results show the fabricated OPA achieves 6 dB back-off drain efficiencies (DEs) of 41.3%–46.2% and 50.1%–62.3% at the frequency bands of 0.89–0.93 GHz and 1.89–1.96 GHz, respectively.
21 June 2023 in IEEE Transactions on Circuits and Systems II: Express Briefs
In this paper, the design of a broadband asymmetrical sequential load modulation balanced amplifier (ASLMBA) is presented. The composited impedance inverters, which contain the intrinsic elements and the output matching networks (OMNs) of the balanced power amplifier (BPA) transistors, are inserted before the output coupler of the BPA pair. In this way, optimal matching condition of the BPA transistors can be maintained over a wide bandwidth. In addition, to ensure an optimal load modulation trajectory of the control amplifier (CA) without over-saturation, a reciprocal mode is applied to the BPA pair by elaborately changing the turn-on sequence of the sub-amplifiers, which is affected by the composited impedance inverter and the OMN of the control amplifier. It is illustrated that the proposed ASLMBA can effectively maintain high efficiency over an extended dynamic range and a wide bandwidth. As a proof of concept, a broadband ASLMBA working over 1.35-2.55 GHz is designed and measured in this work. Experimental results show that the designed ASLMBA achieves a saturation output power of 43.2-45.1 dBm with a saturation gain of 6.5-10.5 dB and a saturation drain efficiency (DE) of 57.8-77.7%. Meanwhile, the 6 dB and 10 dB back-off DEs of the designed ASLMBA are 51.3-66.6% and 47.7-68.9%, respectively.