21 February 2024 in IEEE Electron Device Letters
HPHarinarayanan Puliyalil
+6
Integration density is one of the major criteria that ferroelectric (FE) capacitors must meet before they can be deployed in FeRAM memory arrays that can replace the conventional DRAM memories. In this work we demonstrate, for the first time, back-end-of-line compatible 3D-trench FE La doped hafnium zirconium oxide (HZO) based capacitors fabricated with a foot-print area of 200nm x 200nm for FeRAM applications. The capacitors are based on a trilayer stack (TiO2/La doped HZO/Nb2O5) with TiN as top and bottom electrodes. The initial wake-up of the films is dominated by domain de-pinning effect followed by other mechanisms. Pre-cycling scheme is demonstrated to wake-up the capacitor using higher bias (2.85V, 833KHz, $10^{{5}}$ cycles). Post wake-up, the device survives $10^{{12}}$ cycles with 2P $_{\text {R}}26~\mu \text{C}$ /cm2 till the end of endurance cycling. Retention measurements performed at $85^{\text {o}}\text{C}$ show retention of >70% of the initial polarization at the end of $10^{{5}}\text{s}$ and ~30% polarization is projected to remain at the end of 10 years. The retention was found to be limited by the imprint effect. Our demonstration brings HZO based FE capacitors one step closer to nonvolatile FeRAM applications.
1 March 2020 in AIP Advances
We study the characteristics of the precessional switching induced by voltage control of magnetic anisotropy (VCMA) in back-end-of-line (BEOL)-compatible perpendicular magnetic tunnel junction devices. Using micromagnetic simulation, we find three operation regimes differentiated by zero excess energy, lower boundary, zero energy barrier, and upper boundary. Experimentally, the switching speed (fs) is characterized by two phases: non-precession and acceleration. Non-precession is a thermal mediated phase, where fs cannot be deduced, while in acceleration, both the higher electric field (EF) and in-plane field (Bx) increase fs progressively. We find that the intrinsic thresholds can be retrieved by linear extrapolation of fs as a function of EF. Those thresholds and experimental results are in good agreement with the simulation. In addition, we numerically calculate the characteristic switching speed of 2γ*mz*Bx and verify it experimentally. This work provides insights into the VCMA-induced precessional switching, including detailed understandings of the switching mechanism and modeling of switching speed for reliable write duration control for practical applications.