1 September 2022 in Géotechnique Letters
This paper focuses on the numerical simulation of the deformation processes occurring in the slopes when soils with strain-softening behaviour are involved. In these circumstances, a progressive failure may occur with the consequent motion of the unstable soil mass in the post-failure stage. This problem can be only solved using advanced numerical techniques capable also of accounting for the occurrence of large deformations. However, the solution is generally mesh dependent and may be affected by lack of convergence. In this study, the material point method is employed to simulate the occurrence of large deformations, in conjunction with a strain-softening Mohr–Coulomb constitutive model, in which the shear strength parameters are reduced as a function of the accumulated deviatoric plastic strain, and a model parameter controlling the rate of strength decrease. To evaluate this parameter and to reduce the effects of the mesh dependency on the numerical solution, a novel procedure based on the results of direct shear tests is presented. This methodology is completely analytical and requires few parameters with a clear physical meaning and of simple experimental determination. Some simulations are performed to assess the reliability of the proposed procedure.
1 June 2023 in Geotechnical Research
Slope movements are generally classified into four different phases: pre-failure, failure, post-failure and eventual reactivation. In engineering applications, the pre-failure and failure phases are usually analysed using traditional numerical techniques, such as the finite-element method and the finite-difference method. However, these methods are often based on the assumption of small deformations and consequently are unsuitable for analysing the slope behaviour during the post-failure stage, which is usually characterised by very large deformations. To overcome this shortcoming, the material point method (MPM) is employed in the present study. Specifically, MPM is used to perform an analysis of a landslide in sensitive clays that occurred at Saint-Jude (Quebec, Canada) in 2010. To assess the accuracy of the analysis, the final profile and the displacement magnitude detected after the event are compared with those obtained by the numerical simulation. The results provided by MPM are in satisfactory agreement with field observations. The failure mechanism and the development of the failure surface within the slope are also reproduced successfully. These results also show that MPM is an attractive method for analysing the kinematics of landslides in sensitive clays, requiring also a limited number of conventional geotechnical parameters as input data.
1 July 2025 in Soils and Foundations
13 March 2026 in Proceedings of the Institution of Civil Engineers - Geotechnical Engineering
In the present paper, an analysis is performed on the movements undergone by some residential buildings in 1983, during their construction. A common feature of these buildings is an asymmetric superstructure that makes the vertical loads acting on the foundations highly eccentric. A sloping ground surface and a complex subsoil condition, characterised by the presence of strongly inclined layers of compressible soils, were other predisposing factors for the observed movements. The buildings underwent a significant rigid rotation (tilt) to the extent that their serviceability was compromised because of the resulting floor inclination. As a consequence, construction was suspended and a subsurface investigation consisting of boreholes, cone penetration tests and conventional laboratory tests was performed. In addition, the vertical displacement of some representative points of the building foundations was measured during a period of about 1 year. A finite-element analysis of the building displacements is carried out in the present study to highlight the different roles played by load eccentricity, soil layering and a sloping ground surface in causing the observed building movements. To restore the serviceability of the buildings, their foundations were underpinned with micropiles, some of which were pre-stressed. The effectiveness of this measure is also analysed.